Full-process illustration of ink injection on a civilian printer

This article uses Epson ink warehouse L558 wireless fax machine as an example to explain the entire ink injection process. Each bottle is 70 ml, 4-color split, and the use of one color for one color greatly saves the cost of use.

Epson ink warehouse L558 (word of mouth, purchase) wireless Fax All-in-one machine ink filling operation is simple and easy to use. (Even if there is a small mistake that will pad the ink on your hands, you can wash it with soap) first, unscrew the ink bottle cap and tear the seal of the ink. Then break the top of the ink bottle cap.

Inject the opened ink into the ink silo according to the color representation "Seat Check". During The Ink injection process, press the ink bottle intermittently to facilitate the injection of all the ink into the ink silo.

After playing with ink, put the ink warehouse back to the original position, you can start the entire ink injection process.

Press and hold the "OK" key for 3 seconds. The ink filling process takes 20 minutes.

Although the ink warehouse is filled with ink, it finds that the printer is still not usable. Do not yell at me first. Do you think there is no ink filling process for the printer? When you use Epson ink cartridge printer for the first time, in addition to ink injection, there is also an important ink filling process, you only need to press the "OK" key for 3 seconds, the ink warehouse printer will start to automatically charge the ink, but it takes about 20 minutes for the whole process. You need some patience.