Function configuration of TP-LINK wireless router WDS

I,Central wireless routerB settings

 

Log on to the vro B management page and goWireless Settings-Basic settingsSet"SSID number","Channel", As shown in the figure:

InWireless Settings-Wireless security settingsSet wireless signal encryption information

RecordSSID,ChannelAndEncryption SettingsTo be applied in subsequent configurations of wireless routers A and C.

 

II,Wireless RouterASet.

 

1.ModifyLANPortIPAddress. InNetwork Parameters-LANPort settings, Modify the IP address and B router (to prevent IP address conflict), such as 192.168.1.2, save, the router will automatically restart.

2.EnableWDSFunction. After the restart, log on to the wireless router A with the changed IP address of the LAN port.Wireless Settings-Basic settingsSelect"EnableWDS". Click"Scan", Search for wireless signals.

In the scanned signal list, select the SSID number of router B, and click"Connection".

 

3. Set the channel to be the same as that of router B. Set the encryption information to be the same as that of router B. Click "save ". As shown in the following figure,

 

 

4. DisableDHCPServer. InDHCPServer, Select"Disable", Save and restart the vro.

Wireless RouterAConfiguration complete. At this time, wireless router A and Wireless Router B have successfully established WDS.

 

III,Wireless RouterCSet. The procedure is the same as that of Wireless Router A. Note that when you modify the IP address of the LAN port, make sure that the modified IP address does not conflict with the existing device or computer in the network.