-Operation completed successfully.
-Function error.
-The system cannot find the specified file.
-The specified path cannot be found.
-The file cannot be opened by the system.
-Access denied.
-The handle is invalid.
-The storage control block is damaged.
The command cannot be processed because the storage space is insufficient.
-The storage control block address is invalid.
-Environment error.
-Try to load a program with incorrect format.
-The access code is invalid.
-Invalid data.
-The operation cannot be completed due to insufficient memory.
-The specified drive was not found.
-The directory cannot be deleted.
-Files cannot be moved to different drives.
-No more files.
-The media is protected by writing.
-The specified device cannot be found.
-The device is not ready.
-The device does not recognize this command.
-Data error (cyclic redundancy check ).
-The program issued the command, but the command length is incorrect.
-The drive cannot locate the location of a specific area or track on the disk.
-The specified disk or floppy disk cannot be accessed.
-The drive cannot find the requested sector.
-Printer paper shortage.
-The system cannot write data to the specified device.
-The system cannot read from the specified device.
-Devices connected to the system do not play a role.
-The process cannot access the file because another program is using the file.
-The process cannot access the file because another program has locked part of the file.
-Too many open files are shared.
-Reached the end of the file.
-The disk is full.
-Network requests are not supported.
-Remote Computer unavailable.
-The name already exists on the network.
-The network path cannot be found.
-Network busy.
-The specified network resource or device is no longer available.
-The network BIOS command limit has been reached.
-Network adapter hardware error.
-The specified server cannot run the requested operation.
-An Unexpected network error occurred.
-The remote adapter is not compatible.
-The printer queue is full.
The space for saving the files to be printed cannot be obtained on the server.
-Delete the files waiting for printing.
-The specified network name is no longer available.
-Network Access denied.
-The network resource type is incorrect.
-The network name cannot be found.
-The name of the Local Computer Nic is exceeded.
-The network BIOS session limit is exceeded.
-The remote server has been suspended or is being started.
-The remote computer cannot be connected again because the maximum number of connections has been reached.
-The specified printer or disk device has been suspended.
-The file exists.
-A directory or file cannot be created.
-Int 24 failed.
-Unable to obtain the bucket for processing this request.
-The local device name is in use.
-The specified network password is incorrect.
-Parameter error.
-A write error occurred on the network.
-The system cannot start another process at this time.
100-another system signal cannot be created.
101-another process has an exclusive traffic signal.
102-the traffic signal is set and cannot be closed.
103-no more traffic signals can be set.
104-unable to request an exclusive traffic signal during interruption.
105-the previous ownership of the traffic signal has ended.
107-the program is stopped because the replaced floppy disk is not inserted.
108-the disk is in use or is locked by another process.
109-the MPs queue has ended.
110-the specified device or file cannot be opened.
111-the file name is too long.
112-insufficient disk space.
113-unable to obtain the internal file ID.
114-the identifier of the target internal file is incorrect.
117-The IOCTL call made by the application is incorrect.
118-An error occurred while verifying the written switching parameter value.
119-the system does not support the requested command.
120-this function is only supported by this system.
121-the signal lamp timeout time has reached.
122-the data zone passed to the system call is too small.
123-the file name, directory name, or volume label syntax is incorrect.
124-System Call level error.
125-the disk has no volume label.
126-the specified module cannot be found.
127-the specified program cannot be found.
128-No waiting child process.
130-attempt to use a file handle that has opened the disk partition rather than the original disk I/O.
131-try to move the file pointer to the beginning of the file.
132-the file pointer cannot be set on the specified device or file.
133-the join or SUBST command cannot be used for a drive that contains a previously attached drive.
134-try to use the join or SUBST command on the merged drive.
135-try to use the join or SUBST command on the merged drive.
136-the system attempted to remove the join of the unmerged drive.
137-the system attempted to unreplace the drive's SUBST.
138-the system attempted to merge the drive to the directory on the merged drive.
139-the system attempted to replace the drive with a directory on the drive.
140-the system attempted to merge the drive into a directory on the alternative drive.
141-the system attempted to replace the drive as a directory on the merged drive.
142-the system cannot run join or SUBST at this time.
143-the system cannot merge the drive to or replace it with a directory on the same drive.
144-the directory is not a subdirectory under the root directory.
145-the directory is not empty.
146-the specified path is used in substitution.
147 The command cannot be processed because the resource is insufficient.
148-the specified path cannot be used at this time.
149-an attempt to merge or replace the drive as the directory on the drive is the previous replacement target drive.
150-the system trace information is not specified in the config. SYS file or cannot be tracked.
151-the number of traffic light events specified for DosMuxSemWait is incorrect.
152-DosMuxSemWait is not running. Too many traffic signals have been set.
153-DosMuxSemWait list error.
154-the entered volume tag exceeds the length limit of the target file system
155-another thread cannot be created.
156-the receiving process has rejected this signal.
Section 157 has been abandoned and cannot be locked.
Section 158 is unlocked.
159-the address of the thread ID is incorrect.
160-The parameter string passed to dosexecpgm is incorrect.
161-the specified path is invalid.
162-the signal has been paused.
164-more threads cannot be created in the system.
167-the file region cannot be locked.
170-the requested resource is in use.
173-the request for locking the canceled area is not obvious.
174-The file system does not support minimum unit changes of the lock type.
180-the system detected the wrong field number.
183-when the file already exists, the file cannot be created.
186-the passed flag is incorrect.
187-the specified system signal name cannot be found.
196-the application cannot run on the operating system.
197-the current configuration of the operating system cannot run this application.
199-the application cannot run on the operating system.
200-the code segment cannot be greater than or equal to 64 K.
203-the entered environment option cannot be found in the operating system.
205-the process in the command subtree does not have a signal processing program.
206-the file name or extension name is too long.
207-2nd the ring stack is occupied.
208-the file name wildcard * Or ?, Or specify too many file name wildcards.
209-the signal being sent is incorrect.
210-the signal processing program cannot be set.
212-the segment is locked and cannot be reassigned.
214-there are too many dynamic connection Modules connected to the program or dynamic connection module.
215-The loadmodule cannot be nested.
230-the MPs queue status is invalid.
231-all MPs queue instances are in use.
232-the MPs queue is being closed.
233-No process is found on the other end of the MPs queue.
234-more data available.
240-cancel the session.
254-the specified extension property name is invalid.
255-the extended attributes are inconsistent.
258-The waiting operation is out of date.
259-no data is available.
266-the replication function is unavailable.
267-the directory name is invalid.
275-extended attributes are not applicable in the buffer.
276-the extension property file mounted on the file system is corrupted.
277-the extended Attribute Table file is full.
278-the specified extended property handle is invalid.
282-the mounted file system does not support extended attributes.
288-attempted to release a program running on a multi-user terminal not owned by the caller.
298-too many requests were sent to the signal lamp.
299-only some readprocessmemoty or writeprocessmemory requests are completed.
300-the operation lock request is rejected.
301-the system received an invalid operation lock confirmation.
487-attempt to access an Invalid Address.
534-the arithmetic result exceeds 32 bits.
535-there is a process at the other end of the pipeline.
536-waiting for the process to open the other end of the pipeline.
994-Access to extended attributes is denied.
995-the I/O operation has been abandoned due to the thread exit or application request.
996-overlapping I/O events are not in the signal state.
997-overlapping I/O operations are in progress.
998-memory allocated access is invalid.
999-operation on the error running page.
1001-recursion is too deep; stack overflow.
1002-the window cannot operate on sent messages.
1003-unable to complete this function.
1004-invalid flag.
1005-this volume does not contain identifiable file systems. Make sure all requested file system drivers are loaded and the volume is not damaged.
1006-the volume of the file has been changed externally, so the opened file is no longer valid.
1007-unable to run the requested operation in full screen mode.
1008-try to reference a token that does not exist.
1009-the registry database is corrupted.
1010-the Registry configuration item is invalid.
1011-unable to open the configuration registry key.
1012-unable to read the configuration registry key.
1013-unable to write the configuration registry key.
1014-a file in the registry database must be restored using record or replace replication. Recovery successful.
1015-registry corruption. The structure of a file containing registry data is damaged, the file memory image of the system is damaged, or the file cannot be recovered due to replacement copies, missing or damaged logs.
1016-I/O operations started by the Registry fail to be restored. The registry cannot read, write, or clear any file that contains the registry system image.
1017-the system attempted to load or restore the file to the registry, but the specified file is not in the Registry file format.
1018-an illegal operation was attempted on the registry key marked as deleted.
1019-the system cannot configure the space requested in the Registry log.
1020-you cannot create a symbolic link in the Registry key of an existing subitem or value.
1021-a stable subitem cannot be created under the easily changed parent item.
1022-the notification change request is being completed and the information is not returned to the caller's buffer. The caller must enumerate the files to find the changes.
1051-the service has been stopped and controlled to the service. The service is dependent on other running services.
1052-the requested control is invalid for this service
1053-the service did not respond to the request for starting or controlling the service in a timely manner.
1054-the thread for this service cannot be created.
1055-lock the Service database.
1056-the service instance is running.
1057-the account name is invalid or does not exist, or the password is invalid for the specified account name.
1058-the service cannot be started because it is disabled or the device associated with it is not started.
1059-Circular Service dependency is specified.
1060-the specified service does not exist with the installed Service.
1061-the service cannot accept control information at this time.
1062-the service is not started.
1063-the service process cannot connect to the service controller.
1064-an exception occurred in the service when processing the control request.
1065-the specified database does not exist.
1066-the service has returned a specific service error code.
1067-Unexpected Process Termination.
1068-dependent services or groups cannot be started.
1069-the service cannot be started due to logon failure.
1070-after the service is started, the service is suspended.
1071-the specified service database lock is invalid.
1072-the specified service has been marked as deleted.
1073-the specified service already exists.
1074-the system is currently running with the latest valid configuration.
1075-the dependency service does not exist or has been marked as deleted.
1076-the current Guide is accepted as the final valid control setting.
1077-the service has not been started yet.
1078-the name is used as the service name or service display name.
1079-the account for this service is different from the account for other services running on the same process.
1080-only failed operations can be set for the Win32 service, not for the driver.
1081-this service runs the same process as the Service Control Manager. Therefore, the Service Control Manager cannot perform any operations if the service processing program is aborted unexpectedly.
1082-no recovery program has been set for this service.
1083-the service configured to run in the executable program cannot be executed.
1100-the actual end of the tape has been reached.
1101-The tape access has reached the file mark.
1102-the start of the tape or disk partition has been reached.
1103-the end of a group of files is accessed by tape.
1104-No data is found on the tape.
1105-The tape cannot be partitioned.
1106-the current block size is incorrect when accessing a new tape with Multiple Volume partitions.
1107-partition information cannot be found when the tape is loaded.
1108-the media pop-up function cannot be locked.
1109-media cannot be detached.
1110-media in the drive may have changed.
1111-reset the I/O bus.
1112-no media in the drive.
1113-in the Multi-byte target code page, there is no character that can be mapped to this UNICODE character.
1114-An error occurred while initializing the dynamic link library (DLL.
1115-the system is shutting down.
1116-the system cannot be shut down because there is no ongoing shutdown process.
1117-unable to run this request due to an I/O device error.
1118-No serial device is initialized successfully. The serial driver will be uninstalled.
1119-unable to open the device that is sharing the interrupt request (IRQ) with other devices. At least one other device that uses this IRQ is on.
1120-sequence I/O operations have been written by another serial port. (Ioctl_serial_xoff_counter has reached zero .)
1121-the serial I/O operation is completed because the time-out period has elapsed. (Ioctl_serial_xoff_counter is not zero .)
1122-the ID address mark cannot be found on the floppy disk.
1123-the character field of the floppy disk sector ID does not match the path address of the floppy disk controller.
1124-the floppy disk controller reports an unrecognized error from the floppy disk driver.
1125-the floppy disk controller returns results inconsistent with those in its register.
1126-when accessing the hard disk, the re-calibration operation failed and the retry still failed.
1127-when accessing the hard disk, the disk operation failed and the retry still failed.
1128-when accessing the hard disk, you must reset the disk controller even if it fails.
1129-the end of the tape has been reached.
1130-unable to process the command because the server storage space is insufficient.
1131-potential deadlock status detected.
1132-the specified base address or file offset is not properly aligned.
1140-an attempt to change the power status of the system was rejected by another application or driver.
1141-An error occurred while trying to change the power supply status of the system BIOS.
1142-try to create a link on a file that exceeds the amount allowed by the system.
1150-specify the Windows version required by the program.
1151-specify that the program is not a Windows or MS-DOS program.
1152-only one instance of the specified program can be started.
1153-the specified program applies to the old Windows version.
1154-one of the library files required to execute the application is corrupted.
1155-no application is associated with the specified file in this operation.
1156-An error occurred while delivering commands to the application.
1157-one of the library files required to execute the application cannot be found.
1158-the current program has used all the handles allowed by the system of the window manager object.
1159-messages can only be used with synchronization operations.
1160-the source element has no media.
1161-the target element already contains media.
1162-the specified element does not exist.
1163-the specified element is part of an undisplayed storage resource.
1164-the display device needs to be reinitialized because of hardware errors.
1165-device display needs to be cleared before further operations are attempted.
1166-the device shows that its door is still open.
1167-the device is not connected.
1168-element not found.
1169-the index does not match the specified item.
1170-the specified property set does not exist on the object.
1171-the point passed to getmousemovepoints is not in the buffer zone.
1172-the tracking (Workstation) service was not running.
1173-the volume ID cannot be found.
1175-the file to be replaced cannot be deleted.
1176-the replacement file cannot be moved to the file to be replaced. Keep the original name of the file to be replaced.
1177-the replacement file cannot be moved to the file to be replaced. The file to be replaced has been renamed as the backup name.
1178-the volume change record is deleted.
1179-the volume change record service is not active.
1180-find a file, but it may not be the correct one.
1181-log entries are deleted from logs.
1200-the specified device name is invalid.
1201-the device is not currently connected, but it is a record connection.
1202-attempt to record previously recorded devices.
1203-No network provider accepts the specified network path.
1204-the specified network provider name is invalid.
1205-unable to open the network connection configuration file.
1206-the network connection configuration file is damaged.
1207-empty carrier cannot be enumerated.
1208-an extension error occurred.
1209-the format of the specified group name is invalid.
1210-the format of the specified computer name is invalid.
1211-the format of the specified event name is invalid.
1212-the specified domain name format is invalid.
1213-the format of the specified service name is invalid.
1214-the specified network name format is invalid.
1215-the specified sharing name format is invalid.
1216-the specified password format is invalid.
1217-the specified message name format is invalid.
1218-the specified message target format is invalid.
1219-The creden provided conflict with the existing creden set.
1220-attempted to create a network server session, but too many sessions have been created for the server.
1221-the workgroup or domain name has been used by another computer on the network.
1222-the network is not connected or started.
1223-the operation has been canceled by the user.
1224-the requested operation cannot be performed on files opened in the user ing area.
1225-the remote system rejects network connection.
1226-the network connection has been properly closed.
1227-the network transmission endpoint has an associated address.
1228-The address is not associated with the network endpoint.
1229-attempt to operate on a nonexistent network connection.
1230-an invalid operation was attempted on the network connection in use.
1231-the network location cannot be accessed. For network troubleshooting information, see Windows Help.
1232-the network location cannot be accessed. For network troubleshooting information, see Windows Help.
1233-the network location cannot be accessed. For network troubleshooting information, see Windows Help.
1234-No service is operating on the target network endpoint on the remote system.
1235-request terminated.
1236-Network Connection terminated by the local system.
1237-the operation cannot be completed. Retry.
1238-unable to connect to the server because the maximum number of simultaneous connections for this account has been reached.
1239-attempted to log on to the account within the time it was not authorized.
1240-this account is not authorized to log on from this workstation.
1241-the requested operation cannot use this network address.
1242-the server has been registered.
1243-the specified service does not exist.
1244-unable to perform the required operation because the user has not been verified.
1245-unable to perform the required operation because the user has not logged on to the network. The specified service does not exist.
1246-continue working.
1247-an initial operation was attempted, but the initialization was completed.
1248-no more local devices.
1249-the specified site does not exist.
1250-the domain controller with the specified name already exists.
1251-this operation is supported only when you connect to the server.
1252-the Group Policy Framework should call extensions even if they are not modified.
1253-the specified user does not have a valid configuration file.
1254-Microsoft Small Business server does not support this operation.
1300-not all referenced privileges are assigned to the caller.
1301-some mappings between account names and Security Identifiers are not completed.
1302-no special system quota limit is set for this account.
1303-no encryption key is available. A known encryption key is returned.
1304-the password is too complex to be converted into a LAN Manager password. The returned LAN Manager password is a null string.
1305-the level of revision is unknown.
1306-indicates that the two revision levels are incompatible.
1307-This Security Identifier cannot be assigned to the owner of this object.
1308-This Security Identifier cannot be assigned to the Primary Group of the object.
1309-currently, the customer's thread is not simulated to attempt to operate the simulated token.
1310-the group may not be disabled.
1311-No Logon Server is currently available to serve login requests.
1312-the specified logon session does not exist. It may have been terminated.
1313-the specified privilege does not exist.
1314-the customer does not have the required privileges.
1315-the provided name is not in the correct account name format.
1316-the specified user already exists.
1317-the specified user does not exist.
1318-the specified group already exists.
1319-the specified group does not exist.
1320-the specified user account is already a member of the specified group, or the specified group cannot be deleted because the group contains members.
1321-the specified user account is not a member of the account in the specified group.
1322-the remaining system management accounts cannot be disabled or deleted.
1323-the password cannot be updated. The value provided as the current password is incorrect.
1324-the password cannot be updated. The value provided to the new password contains the value that is not allowed in the password.
1325-the password cannot be updated. The value provided for the new password does not meet the length, complexity, or historical requirements of the character field.
1326-Logon Failed: Unknown user name or wrong password.
1327-Logon Failed: User Account limit.
1328-Logon Failed: The Account Logon Time limit is violated.
1329-Logon Failed: the user is not allowed to log on to this computer.
1330-Logon Failed: the specified account password has expired.
1331-Logon Failed: The current account is disabled.
1332-No mappings are completed between account names and Security Identifiers.
1333-excessive local user Identifiers (luids) in one request ).
1334-no more available local user Identifiers (luids ).
1335-for this special usage, the secondary authorization of the security id is invalid.
1336-the access control list (ACL) structure is invalid.
1337-The Security ID structure is invalid.
1338-the security descriptor structure is invalid.
1340-an inherent access control list (ACL) or access control project (ACE) cannot be created ).
1341-the server is currently disabled.
1342-the server is currently enabled.
1343-the value provided to the identification code authority is invalid.
1344-no more available memory to update security information.
1345-the specified attribute is invalid or incompatible with the attributes of the entire group.
1346-the specified simulation level is invalid or the provided simulation level is invalid.
1347-An anonymous Security token cannot be opened.
1348-the verification information category of the request is invalid.
1349-the type of the token is not appropriate for the method it is trying to use.
1350-security operations cannot be performed on objects not associated with security.
1351-unable to read configuration information from the domain controller, or because the machine is unavailable or access is denied.
1352-The Security Account Manager (SAM) or the Local Security Authority (LSA) server is in an error status of running security operations.
1353-the domain is in the error state of running security operations.
1354-this operation is only applicable to the main domain controllers of the domain.
1355-the specified domain does not exist or cannot be contacted.
1356-the specified domain already exists.
1357-try to exceed the limit on the number of domains per server.
1358-the request operation cannot be completed because the disk's serious media fails or the data structure is damaged.
1359-an internal error occurred.
1360-the Generic Access type is included in the access mask mapped to a non-Generic Access type.
1361-the security descriptor format is incorrect (absolute or self-related ).
1362-the request operation is only allowed in the login process. The called process is not registered as a logon process.
1363-unable to start a new session with the ID in use.
1364-unknown specified verification data packet.
1365-the logon session is not in the same status as the request operation.
1366-the logon session ID is in use.
1367-the logon request contains invalid logon type values.
1368-you cannot simulate using the named pipe to read data.