Ghost8.0 detailed use methods and command line parameters _ Application Tips

Source: Internet
Author: User
Ghost Command Line arguments:
Ghost has a number of useful command-line arguments, the following are common:
1,-RB this time ghost operation end exit automatic reboot. A very useful parameter, especially when replicating the system you can safely leave.
2,-fx this ghost operation end exit automatically back to the DOS prompt (if you are a DOS command to start the ghost).
3.-sure answer "YES" to all prompts or warnings required for confirmation. This parameter has certain danger, only recommends the advanced user to use, is careful is wonderful!
4,-fro If the source partition found a bad cluster, then slightly prompted to force the copy. This parameter can be used to try to save data in the hard drive bad track.
5.-FNW disables write operations on FAT partitions to prevent misuse (this parameter is not valid for NTFS partitions).
6,-f32 the source FAT16 partition copy after conversion to FAT32 (if the target partition is not less than 2G). Because there are very few operating systems that support FAT32, this parameter is used sparingly unless you are replicating 98 partitions!
7,-f64 the source FAT16 partition copy after conversion into 64k/cluster (originally 512k/cluster, if the target partition is not less than 2G). This parameter applies only to Windows NT systems, because the FAT16 of the 64k/cluster is not supported by other operating systems.
8.-fatlimit the NT FAT16 partition to 2G. This parameter is useful when replicating Windows NT partitions and does not want to use the FAT16 of the 64k/cluster.
9.-span the parameters of the split volume. Another image FILE that prompts you to copy to another partition when there is insufficient space.
10,-auto when the copy is not prompted automatically give a filename to continue execution.
11,-crcignore ignores the CRC ERROR in image file. Do not use this parameter to prevent data errors unless you copy something that does not matter.
Zhu Wenbao from the "China Education computer Newspaper" March 2, 2000

Fully automatic speed recovery with Norton Ghost your system:

Norton Gost as a cloning application tool software, easy to use, powerful, can greatly reduce the PC software installation and upgrade time, so as to reduce enterprise costs. Similarly, for individual users, using Ghost to restore the system can be said to be relaxed and enjoyable, and therefore popular.
In general, Ghost to restore the system can be done in 10 minutes. can also occasionally see in the BBS someone because of the recovery of brain fever misoperation, resulting in the preservation of important data partitions are covered, can be said to be a heavy loss, want to cry without tears. One of the main reasons is that we used to refer to the C disk, D disk, E disk, actually refers to the partition. For example, the Windows equipped with the C disk backup to image files, save to E disk, should be selected local \partition \to Image. Similarly, the local \partition \from image should be selected for recovery. At this time, if a moment of confusion, the choice of partition when the words, that can be finished.
I have seen some of the network version of the magazine introduced are simple version of Ghost, the introduction is also illustrated, plain and easy to understand. Because the use of the software is very simple, when used to keep a clear mind, each option in a 100% to be sure before the press RETURN, or exit the confirmation before it. In this case, there will be no problem.
Not long ago, all right, casually looked at the 160 pages of ghost Help file, found a very useful function, it is like a DOS command, you can knock the way to complete the ghost backup and restore function. If the command is made into a bat file, then the operation is done as long as the file is executed. Moreover, if the command is added to the boot floppy Autoexec.bat file, conditional to the back of the image file, Ghost burned to the bootable CD, then, even if drunk, also know to press the power, you can restore your system. (Important note: You can not drink when writing bat file)
1. Practical Use examples
Here is my hard drive partition: Disk 1

Partition Type Volume Label
C:1: PRI DOS Pwin98
E:2: PRI DOS Jwin98
3:ext DOS
D:4: LOG DOS Data

1) Backup
Ghost.exe-clone,mode=pdump,src= "/blog/1:1", dst=d:\back\pwin98b.gho-z9-sure
function: The first partition (1:1) of the first physical hard disk is backed up to the back folder of D disk in the highest compression form (-Z9), and the image file name of the backup is Pwin98.gho, and the last confirmed window (-sure) is not present until the program performs the backup.

2) Recovery

Ghost.exe-clone,mode=pload,src= "/blog/d:" \back\pwin98b.gho:1,dst=1:1-SURE-RB
function: The first partition (PWIN98B.GHO:1) in the Pwin98.gho image backup file is restored to the first partition (1:1) of the first physical hard disk in the back folder of the D disk, and the last confirmed window is not present before the program performs the recovery. sure), automatically restarts the system (-RB) after recovery is complete.

2. Copy Self Help file ghost.pdf application example
1) ghost.exe-clone,mode=copy,src=1,dst=2-sure
(Copy local drive one to local drive two, without the final warning prompt.)

2) ghost.exe-clone,mode=load,src= "/blog/g:" \2prtdisk.gho,dst=2,sze1=60p,sze2=40p
(Load drive two from a image file and resize the destination partitions to 60:40.)

3) ghost.exe-clone,mode=pdump,src= "/blog/1:2", Dst=g:\part2.gho
(Save the second partition of drive one to the image file on a mapped network drive G:. )

4) ghost-clone,mode=pload,src= "/blog/g:" \part2.gho:2,dst=1:2
(load partition two from a two-partition image file on a mapped drive g:onto the second partition of the local disk. )
Interested can go to Symantec Company homepage to download a trial version, which has Help file, and has a * * * multi-function hard disk partition tool Gdisk, also quite good, I was using it to achieve bilingual Windows98 environment switch.

Description
1. Computer beginners, do not simply imitate the use case, should be based on their own specific circumstances to use the command.
2. This method, suitable for a certain computer users experience, in for beginners friends back up the system, and it is difficult to restore each person to use.
3. Easy Commin, Shing, not to try.

Contact Us

The content source of this page is from Internet, which doesn't represent Alibaba Cloud's opinion; products and services mentioned on that page don't have any relationship with Alibaba Cloud. If the content of the page makes you feel confusing, please write us an email, we will handle the problem within 5 days after receiving your email.

If you find any instances of plagiarism from the community, please send an email to: info-contact@alibabacloud.com and provide relevant evidence. A staff member will contact you within 5 working days.

A Free Trial That Lets You Build Big!

Start building with 50+ products and up to 12 months usage for Elastic Compute Service

  • Sales Support

    1 on 1 presale consultation

  • After-Sales Support

    24/7 Technical Support 6 Free Tickets per Quarter Faster Response

  • Alibaba Cloud offers highly flexible support services tailored to meet your exact needs.