Port mapping different router settings are different, some are set in "Virtual Server", but the approximate setting content is the same
There is a commonly used port number has been determined, so almost enough for our use: Common open port has 80,21,3389, 80 is the site common port, 21 is the FTP server common port, 3389 is the Remote Desktop Connection port.
1. After logging in to the AI Router Web management interface, find the ' Advanced Settings '---NAT and DMZ configuration (port mapping If you can't find it, it's usually in NAT)
Add Port mappings and click the Add new entry feature below the NAT static map list
Port mapping configuration settings
The next step is the focus of this experience, as explained
Static mapping name : This is used for notes, for example, what do you use this mapping for?
external start Port : Source port (both extranet port)
IP Address : Server Intranet IP Address
common ports, typically lists of common ports
Intranet Port : The port number that needs to be mapped internally (typically internal and external)
If you need to map a port that is not common, you can select the "Custom" port
- 5
If the port protocol is not clear, you can select the tcp/udp Port
END
Special Reminders
If you need to set up port 80, the default is to open Web remote management.
Open an AI router open---System Management---Device management option (if not enabled, intranet can access port 80 with IP)
Other precautions
When setting the port mapping, if there are many network cards do not know which one to choose is the Internet network card what to do. Turn on " run status " to show connected networks are external network network cards
If you set the port mapping to not take effect, check the status that column shows "Disabled"
Hayter Router port mapping how to set up