Step 1: Prepare the iphone, as shown in the following figure, and then prepare a rose-sized iphone.
-As shown in the figure, we use a dedicated starter.
-When we cut down the following screws, we can find a suction cup to suck up the back. Of course, we cannot use it too hard.
-As shown in the following figure, our back is taken out.
Step 2: remove the screen component.
-Now only the back north is taken out, and the battery inside is fixed. We need to unscrew three #00 Philips standard screws as shown in the figure.
-After the metal plate is opened, separate the wire connector it protects from the motherboard.
-The Screen component is removed.
Step 3: Now let's loosen the battery.
-As shown in the following figure, we can see that the battery has a connector with the motherboard. Now we need to use three #00 Philips standard screws to fix and unscrew them, as shown in the following figure.
-Let's loosen the connector so that the battery can be taken out. Let's take a look.