The new buildings are all using IC Card gas meters. When I got the house, I didn't see the IC Card Gas Meter User Manual. Many people may be worried about this, here we will explain how to view the reading and balance of the IC Card gas meter.
Product appearance
Optional
Product advantages
Main Technical Parameters
Check the reading and balance of the IC Card Gas Meter and prepare the IC card and flashlight. Generally, the gas meter is installed under the stove, which is relatively dark.
Move the upper right side of the battery cover under the gas meter and open the battery cover.
Insert the front of the gas card into the gas meter and you will hear a prompt;
The above shows how many cubic meters of gas is used, and the balance shown below
The correct recharge method for the IC card:
When using IC card recharge, check whether the voltage of the gas meter is normal. If the voltage is insufficient, replace the battery. Insert a yellow IC card with an arrow to the gas meter IC card mouth and push it to the end. Observe the indicator light changes. After the indicator light is on and the buzzer returns the reading for about 30 seconds, take out the IC card and recharge the screen. or observe the gas volume on the LCD screen. after about 30 seconds, then the IC card is taken out, and the recharge is complete. You can use the valve by pulling it to the Green Line.
How can I check the reading and balance of the IC Card gas meter?