How can I reset a vro?

Broadband Router:

1 ),With M1, M2 lamp TL-R4XX, TL-R4XXX next-generation network bar dedicated and TL-FR5300 Firewall Router reset method:

There is a small hole in the front/back panel of the vro with the word "Reset" next to it. Turn off the power of the vro and hold down the Reset key to find a tip like a pen tip, press and hold the Reset key to power up the vro. Wait for about 3-10 seconds. After the M1 and M2 lights flash three times at the same time, the vro is successfully Reset;

Note:

After resetting, the router will be restored to the factory settings. The default login IP address is 192.168.1.1; the default user name and password are admin/admin. When logging on, please note that the IP address of your computer is 2-at 192.168.1.XX) network Segment!

2 ),With PWR, SYS light router and TL-FWR1100, TL-FR1000 two Firewall Router reset method:

Disconnect the power of the vro。 and hold down the Reset button with a tip object (such as a pen tip). You still need to press the Reset key to re-power the vro。. When the SYS indicator is blinking, release the Reset button. Then, the router will return to the factory status.

Note:

The power cannot be switched off before the router is fully started. Otherwise, the configuration may not be restored to the default value. After resetting, the router will be restored to the factory settings. The default logon IP address is 192.168.1.1, and the default username and password are admin/admin.

SOHO routers using this reset method are: TP-R410 +, TP-R460 +, TP-R860 +, TP-R1660M.

3 ),How to reset a vro:

TL-R420 Reset method: press the Reset key about 2 seconds after the release, the router will restore to the factory default value. Default management address: 192.168.1.1; default username and password: admin/admin;

TL-R400 + Reset method: power off, hold down the Reset button, then power on this process still need to hold down the Reset Key), about 5 seconds to release the button, the router will restore to the factory default value. Default management address: 192.168.123.254; default user name and password: admin/admin;

TL-R400 Reset method: press the Reset key about 2 seconds after the release, the router will restore to the factory default value. Default management address: 192.168.123.254. Default user name and password: admin/admin.

Wireless:

1 ),How to reset a wireless router:

TL-WR841N Reset method: in case of power-on, please press the Reset button three times in a row within 5 seconds. Then, the router will restart,

After the restart, the router will be successfully restored to the factory settings.

TL-WR3xx/TL-WR5xx/TL-WR6xx Reset method: first turn off the power, then hold down the Reset key do not put, then turn on the power of this process still need to hold down the Reset Key ), after the system light flashes three times, the Reset key is released and the router is restored to the default value. Default management address: 192.168.1.1; default username and password: admin/admin;

TL-WR240 +/WR2402.0 Reset method: press the Reset button for about 10 seconds after power-on, the router will be restored to the factory default value. Default management address: 192.168.1.1; default username and password: admin/admin;

WR245Ver1.0 Reset method: Press and hold the Reset key for more than five seconds when powered on, and the router will be restored to the default factory value. Default management address: 192.168.1.1; Default User Password: admin/admin;

WR245Ver2.0 reset method: Turn off the power supply, press this button, and then turn on the power, about 3 seconds, the System light is off and then on, the router will be restored to the factory default value. Default management address: 192.168.1.1. default username and password: admin/admin.

2 ),Wireless AP reset method:

TL-WA501G Reset method: first turn off the power, and then press the Reset key do not put, then turn on the power still need to press the Reset Key), after 3 seconds, the SYSTEM light first turn off and then light, the AP will be restored to the factory default value. Default management address: 192.168.1.1; default username and password: admin/admin;

TL-WA200/TL-WA200 + Reset method: power-on status press the Reset button 5-10 seconds, when the WLAN light from off to slowly shining, indicating that the Reset is successful; 3.0 version of the IP address is 192.168.1.100, the default user name is admin/admin, And the IP address of Version 3.1 is 192.168.1.1. The default user name is admin/admin.

Vswitch:

Vswitch:

Switch with reset key: TL-SL2210web, TL-SL2218web, TL-SL2428web, TL-SL2452web, TL-SG2109web, TL-SG2216web, TL-SG2224web. The methods for resetting these vswitches are the same as those for resetting vrouters: power-off first, hold down the Reset key, and power-on again. If all the lights flash, the vswitch is Reset successfully. The default Management address is 192.168.0.1, and the default user name and password are supervisor/supervisor;

TL-SF2226P +/TL-SL2226P + reset method: With the TP-LINKSSU manager, click device-> restore factory settings, switch will be restored to factory default. The default Management address is 192.168.0.100, And the account name and password will not be restored. You can also connect to the vswitch through the serial port through the Super Terminal and Telnet to perform the reset operation. Note: If the password of a common user is forgotten, you can only log on to the Super Terminal using the administrator password. The administrator password is set to admin and cannot be modified. After logon, you can directly change the password of a common user)

TL-SF2108P, TL-SF2109P, TL-SF2808P, TL-SF2216P, TL-SF2224P, TL-SF2232P, TL-SL2226P, TL-SF2008, TL-SF2117P, TL-SF1016V, TL-SF1024V, TL-SG2008 reset method: this series of switches using TP-LINKSSC program for management, you can log on without the user name or password;

TL-SF3226P, TL-SF3008, TL-SF3117P, TL-SL3428, TP-SL3452, TP-SG3109, and some WEB managed switches reset method: connect the switch through a serial port, use a Super Terminal to log on to the switch, there is a prompt interface before starting the switch, press the CTRL-B key to enter the bootmenu, see "PleaseInputBootrompassword:" And press enter directly, then select "3: Restorefactorydefaultsetting" in the interface that appears, restore the switch to factory settings, and finally select "5: reboot. The default Management address is 192.168.0.1, and the default user name and password are supervisor/supervisor.

ADSL:

TD-W8900G/W8910G/W8920G Reset method: disconnect the router power, with a tip object (such as pen tip) Hold down the Reset button do not put, re-plug in the power, lasting more than 5 seconds, release the Reset button. Then, the router will return to the factory status.

TD-8820 Reset method: When the TD-8820 is running, press the Reset button with the tip object to do not put the restore factory Settings button), lasted for more than 15 seconds. Release the Reset button. The device will be restored to the factory settings. Note: you cannot release the Reset button before the device is fully started. Otherwise, the configuration may not be restored to the default value.

TD-8800 Reset method: in the case of continuous power, continuous press Reset key three times, all the indicator flashing, Reset successful. Default management address: 192.168.1.1; default username and password: admin/admin;

TD-8810/TD-8810 +, TD-8610/TD-8610 + Reset method: first power off, then press the Reset key, then turn on the power, wait for about 3 seconds, Reset successful. Default management address: 192.168.1.1; default username and password: admin/admin;

TD-8830/TD-8831 Reset method: in the case of continuous power, hold down the Reset key for about 10 seconds, and then release, Reset successful. Default management address: 192.168.1.1. default username and password: admin/admin.

Print Server:

TL-PS110P/PS110U Reset function key, Click Reset key to restart.

TL-PS110P/PS110U Reset method: first power off, then press and hold the Reset key don't relax at the same time power wait 5 seconds after the release, that is, restore the factory settings. After the management password is reset, it will become the initial password-less status. The IP address of the TL-PS110P is not restored to the default 192.168.0.10, but remains the last configured IP address. Note: The reset key of the TL-PS110P is on the side and the reset hole is small.

TL-PS210U Reset method: disconnect the power, hold down the Reset key do not put, and then connect to the power 5 seconds after the release of the Reset key, will make the Print Server

If the server restores the default factory value, the IP address will return to the default IP address 192.168.0.10.

The default IP address of this multi-function printing server is 192.168.0.10 (default ). Determine the computer and print server before use

Whether the IP address of is the same CIDR block.

Edit recommendations]