A lot of offices now have printers, and in general, the printer program is loaded on a computer, through the operation of this computer, you can perform the printing work, but not only to make this printer has a printing service, otherwise, but to increase their workload, others have any need to print, will come to you , so how do you realize the sharing of printer services? You just need to add a print server port. Here's how to add a print server port in Ghost Win7.
1. Click the Start menu, then go to the interface of the control Panel, and then find the device and printer in the interface and click Enter.
2. After entering the equipment and printer interface, we can see the current system has been installed in the printer program, and then to the printer icon right click, select the printer properties.
3. In the Properties window, we switch the interface to the port, and then click the Add port below, in the pop-up available port type we select Standard TCP/IP port and click on the new port below, then click Next.
4. In the Printer Port Wizard page, we need to set the printer name or IP address, which needs to be set according to the actual IP address, set up after the next step under Click.
5. Select Custom in the device type, then click on the Rear setting button, select LPR in the protocol, then set the queue name to LP1 and enable the LPR byte count, finally click OK.