How do I set up a WiFi network with my computer? Wi-Fi Networking Install configuration tutorial

1. Connect the computer with the router this only gives a simple screenshot, I believe that everyone home has been a good line of cloth:

2. Now officially start, we right click on the computer table in the "Network Neighborhood"-"attributes" as shown:

3, then we click on the "local Connection"-"properties" as shown in the following image:

4, click the "Internet Protocol Master (TCP/IP)" button in the pop-up dialog box and click on the "Properties" buttons:

5, now we in the IP Properties dialog box to fill in your 192.168.1 network segment, such as 192.168.1.111, and then "OK" can:

6 Open the browser again, enter 192.168.1.253 in the address, press ENTER, enter the correct username and password, and then click OK:

7, now we go to the router's "Setup Wizard" dialog box click "Next" button:

8, then we select the mode of work, click on "AP" and then click the "Next" button:

9, now entered the "Wireless Settings" in the following we randomly enter a SSID (such as: www.111cn.net) and then in the Wireless security options Click "Wpa-psk/wpa2-psk" and then enter the password (this is your wireless password is the code) "Next"

10, then we just click "Reboot"

11, now we are 2, 3, 4 steps, and then in the "property" to automatically obtain the IP mode:

12, now you use mobile phone Scan wireless network will find a www.111cn.net WiFi ah, and then we click on the input network to set the WPA-PSK/WPA2-PSK password can be online.