What does DNS mean? How is DNS set up? Many internet newbies are not too clear about this. DNS is simply the domain Name System, and Chinese is the name of the field. So what's the use of DNS? How do I set up DNS? The following small series will be introduced in detail.
What's the use of DNS? DNS is a very important and commonly used system in a network of TCP/IP architectures, such as the Internet. The main function is to easily remember the domain name and people do not easily remember IP address for conversion. This network host, which performs the DNS service above, can be called DNS Server. Basically, we generally assume that DNS simply converts domain name to IP address, and then uses the IP address found to connect (commonly known as "forward resolution"). In fact, the ability to convert IP address to domain name is quite often used, and when you login to a UNIX workstation, the workstation will do a reverse check to find out where you came from (commonly known as "reverse parsing").
How do I set up DNS? The main methods of DNS setup are as follows:
First, view (or set) The IP address of this machine
Select control Panel → network and dial-up connection → local connection → right → attribute →internet protocol (TCP/IP) → properties → Use the following IP address, if:
1, the local IP address is set up, the "IP address" in the column content is the local IP address.
2, if the local IP address has not been set, then in the "IP Address" column fill "192.168.0.168"; "255.255.255.0" in the "Subnet Mask" column; Both the default gateway and the preferred DNS server are populated with the local IP address, which is "192.168.0.168".
II. establishment of related DNS records
1, open the DNS manager. Select "Start → program → management tool →dns".
2, for the domain name "163.net" to establish the relevant DNS records. Select "Forward search area → Right key → new → area", enter "NET", select "net→ → new → field", enter "163", select "163→ → new → host", "name" column remain empty, "IP Address" column input "192.168.0.168"; Add Host ", when prompted, select the default value.
3, test whether the DNS record was established successfully. Select "Start → run", enter "cmd", and then determine, you can open an MS-DOS window, enter the "ping shendu123.com", if the following map of the response, that is, the successful establishment of a DNS record!