Finally, we can figure out that the method for entering Recovery in the flash instruction is incorrect. This method is indeed in the engineering mode, and should be operated like this to enter the Recovery mode: press and hold the power key for about 2 seconds, and then press and hold the volume plus or minus keys (press the three keys at the same time) to enter the Recovery mode, the following is a summary of this article.
I. Preparations:
1: Make sure your phone can connect to your computer with a usb cable. This is required.
2: The mobile phone driver has been installed on the computer. If it is not installed, Baidu search and download
3: Download the recovery package. Baidu searched for the official download and downloaded the package to your computer.
II. Starting to recovery:
1: First shut down the phone (only shut down, do not unplug the battery), and do not use a data cable to connect to the computer, first disconnect the data cable
2: decompress the downloaded recovery package on your computer, as shown in the following figure:
3: Find the flash_tool.exe file in the folder decompressed by the volume, as shown in the following figure:
4: Double-click it to open it.
5. Click the Scatter-loading button on the software to select the file corresponding to the software.
6: Select mt6589_android_scatter_emmc.txt in the folder that is just extracted.
7: Click "da dl All With Check Sum" to Check the name, as shown in the following figure. You can also remove the Check box before BOOTIMG in the list below.
The above items need to be checked
Remove the check box before BOOTIMG
8: click Download, and a small window will pop up. Select yes.
9: when the mobile phone is shut down, use a USB cable to connect the mobile phone to the computer and automatically start downloading. No operation is required, as shown in the following figure. The download is in progress (the download takes a long time. Please be patient):
10: then you will be prompted to bring up a green circle, which means you have succeeded!
11: if the following problem occurs, unplug the data cable and refresh it again. If the problem persists for multiple times, restart the computer. In addition, when you connect the data cable, press "volume +" first, after reading the red bars, press "volume-" to read the yellow bars.
12: The download is complete. After the upgrade, disconnect the USB cable.
How to enter the recovery mode: when the phone is shut down, install the power key for about 2 seconds, and then press and hold the volume plus or minus two keys (three keys at this time) until the Chinese recovery mode is enabled.
The above is a common recovery
The figure above shows Uncle Mobile's recovery
