1. In the open n9109w, we click "Application" to open the entry.
2. Locate the "Set" icon in the open application to open the entry.
3. Then you will see that there is a "private mode" which we click to open to enter.
4. Then in the open interface to enter the private Mode wizard prompts the content, click "Next".
5. After reading the privacy mode disclaimer, click "Next".
6. After reading the application prompts for "Use private mode", click "Start".
7. Choose a private mode access type, here to click "PIN code" for example.
8. Enter the PIN code you want to set, and then click Continue.
9. Enter the PIN code you want to set again and click OK.
10. After reading the "screen lock settings" prompts, choose "Skip" or "OK" according to your needs, here to choose "Skip" as an example.
11. At this time the private mode is enabled, open, the upper left corner of the screen will show the private mode icon, the following figure:
All right, here we go. About n9109w Open Private mode is finished, if we want to close the private mode method steps are the opposite, the following steps
In standby click on "Application"-"set"-"Private Mode"-"Private mode" right slider,-"OK", at this time the private mode is closed is not very simple.