Step 1. Remove the back cover of the hanger Rod
After the S27C750P arm of the Samsung LCD is slide, the power cord and signal line can be placed inside.
First, place the display normally on the desktop, hold the arm with both hands, use the thumb to push up and slide the back cover of the arm, and finally remove the back cover of the arm.
Step 2. Place the cables in the support bar
As shown in the following figure, place the power cord and signal line in the support bar.
Step 3. Install the back cover of the support bar
1. Hold the back cover of the support bar with the right hand, and fix the cable in the groove of the back cover of the support bar with the left hand side.
2. Hold the bottom of the fixed shelf rod with the left hand, hold the top of the shelf rod with the right hand, and then press the back cover of the shelf rod with the right thumb down.
3. Installation is complete.