How does the notebook memory be disassembled and installed and the memory is added?

Laptop computer will also appear black screen, blue screen, can not display, beep beep, heap of English and so on. A lot of the time is hardware contact problems, such as: battery, memory, hard disk and so on. If your laptop is a memory problem, how do I reseat the installation? Now let's take a brief look: How does laptop memory, such as loading/unloading/notebooks, add to the memory bar?

Tools/Materials

Notebook

Phillips Screwdriver

Memory Strips

How to disassemble the notebook memory?

1, shut down the power supply, the mouse and its equipment have been unplugged!!! General notebook memory in the back.

As shown in figure

2. Find the location of the memory bar.

As shown in figure

3. The Phillips screwdriver is used here, and the memory cover plate is removed. (Pay attention to the cover plate good bayonet)

As shown in figure

4. There are elastic cards on both sides of the memory.

As shown in figure

5, with two hands to the memory of the two elastic card gently pushed outward!!!

As shown in figure

6, slowly the memory bar will bounce up.

As shown in figure

7, so you can unplug the memory bar.

As shown in figure

8. Here you can see the card slots of the memory bar.

As shown in figure

9, the memory is removed, you can use an eraser to wipe the metal sheet (gold finger) to oxidize and so on

As shown in figure

How does the notebook memory install and increase the memory bar?

1, before the notebook memory how to disassemble, the installation is relatively simple.

Here in the installation should pay attention to the angle and bayonet to be aligned.

As shown in figure

2, gently push, push and then gently press down the elastic card will automatically buckle up!!!

As shown in figure

3. If you want to increase the memory, note that the memory of the card slot below is installed first. Then, plug in the memory that you want to add (rub the metal sheet with an eraser before installing it (gold finger)). Note: When adding memory, the model is written to the memory, preferably with the brand OH!!!

(Different brands of memory are sometimes incompatible, different models such as: DDR3, DDR3 1333,DDR2, DDR2 667--DDR2 and DDR3 is not the same OH)

As shown in figure

4, the installation completed lock the memory of the cover plate, the boot try it.

As shown in figure

The above is how the notebook memory disassembly installation and increase the memory bar method introduced, I hope we can help!