In router settings, it is sometimes necessary to reboot the router to take effect when the router DNS, WiFi wireless password, or other related settings are changed. So how does the router reboot? This is a lot of small white friends, easy to doubt a problem. Below, the small computer network management for everyone to bring 2 kinds of router Restart method, little white child shoes come and see.
Method One: Press the reset key on the router to reboot
General Router interface has a rest reset key, if you need to restart the router, you can click this button.
It should be noted that the router reset key do not hold, long press the reset button will cause the router to restore the factory settings, details: "How to restore the router to set up the router to restore factory settings guide."
Method Two: Restart the route in the router setup
Method One can restart the router, but it is inconvenient, because if the router resets the key 5s, it will cause the router to revert to the factory setting. And the following in the router setup, operation restart the router, simple and convenient, the specific methods are as follows.
1, first in the browser, open the router login address: 192.168.1.1, and then press ENTER to open, and then enter the router management account password, login can, as shown in the following figure.
* Note: Some of the router's landing address may not be 192.168.1.1, if this address can not be logged, please check the router on the surface of the nameplate label.
2, landing router Backend management interface, click on the left side of the menu at the bottom of the "System Tools", in the Expanded System menu tool, click to open the "Restart the router", and finally to the right of the restart operation, click "Restart the router" can be, as shown in the following figure.
Finally wait for the router to restart the completion, restart completed, we again connect the router to the Internet.