How does the router set up automatic dial-up access?

With the development of Internet broadband and the popularity of mobile devices, wireless routers are now one of the basic configurations of each family. Because the router becomes a common tool, it should be able to perform its function completely. The automatic dialing is one of the most important and commonly used functions. Then how does the router set up the automatic dial-up Internet? The following small series for everyone to introduce!

Method/Step

ADSL broadband used to need dial-up Internet, now some cell fiber broadband still need to dial. So is it possible to hand over the dial-up task to the router? You can, of course, first use the router's IP address (a hint on the back of the router) in the browser's address bar, and press ENTER to open the router's settings.

Then, log in using the username and password (the factory default username and password is usually admin)

Network parameter →wan Port set →wan port connection type → point open pull-down menu

Click to select PPPoE

At this time the interface will change, there are Internet accounts, internet passwords and other settings.

You can also set up a second connection. There are also automatic connection settings, 0 means that the network is not automatically broken. Once set, click on the connection to take effect.

Disable, static IP, dynamic IP three options, if you do not know your connection type can click Automatic detection, will later detect the correct connection type.

If necessary, you can click on advanced settings, but to see clearly, there is no special needs, do not arbitrarily set.

The above is how to set up the router automatic dial-up access method Introduction, we have learned? hope to help you!