How does the IPhone7 plus back cover open? iphone7p the back cover to open the text tutorial

IPhone7 Plus to dismantle the graphics and text tutorial, interested friends may wish to take a look.

IPhone7 plus split-back cover graphics and text tutorial

Note that this article refers to the IPhone7 plus demolition machine will not affect the warranty, but due to the demolition opportunity to affect the mobile phone's IP67 waterproof ability, and the risk of dismantling the machine, not recommended by the professional, this article is for reference only, risk ego.

Preparation Tool:

iphone-specific screwdriver, hot air gun, sucker, thin, Kari and so on.

IPhone7 plus open back cover method steps:

1, first the iphone 7 plus shutdown;

2. Use the card needle to remove the Cato on the right side of the IPhone7 plus fuselage;

3, using the iphone dedicated screwdriver, the bottom of the 2 fixed screws removed, as shown in the figure.

4, IPhone7 Plus in addition to the use of screws fixed, the screen also has fixed glue and card buckle fixed, so before dismantling the machine, the best friend to use a hair dryer on the screen around the uniform heating, and then the use of sucker from the screen surface to start tearing, as shown in the following figure.

Ps. There is no hot air gun, but the difficulty of removing the screen will be much more difficult.

5, the use of sucker from the screen surface suction gap, then need to use plastic flakes from the gap to find the entry point, and then cut open the gap until the separation screen, as shown in the following figure.

6, IPhone7 Plus screen assembly and the line with the motherboard connection, so remove the screen, you need to be careful not to tear the screen line, should be cut off the line connection, and then completely separate the screen assembly, as shown in the following figure.

IPhone7 Plus adopts one metal fuselage design, the rear cover is one with the middle frame, it belongs to the design of the detachable rear cover, and the dismantling machine starts from the screen. If you want to remove the rear cover, you will need to remove the motherboard, battery, and other internal components.