How does the lingke system establish a VPN connection through PPTP?

How does the lingke system establish a VPN connection through PPTP today's topic is the method of establishing a VPN connection through PPTP, which is often used when setting a VPN Server,
Users who do not know much about this can refer to the comparison. The so-called PPTP connection means that an Internet user connects to a VPN device through PPTP dialing to establish a VPN connection.
1. log on to the vro Management page for settings on the vro. the settings of this function are in the VPN configuration. The following describes how to perform this configuration. (1) Enable the PPTP user on the vro and enable an IP segment as the Internet. Www.2cto.com

(2) set the logon information of the PPTP user. You can specify that the IP address obtained after the account is accessed as the specified IP address, or you can select automatic allocation.

Ii. Computer settings (1) take the XP system as an example. Open the network connection and click Network task on the left to create a new connection.

(2) Select the network to connect to my workplace-then select virtual private network connection-enter the company name
-Select "Do not dial initial connection" and enter the wa n port ip address of the vro you want to dial in. After Entering the ip address, a dialog box is displayed,
Enter the account and password previously defined in the lingke router for dialing.

After the preceding settings, you can successfully connect to the network of the lingke router through PPTP. This article is from