How routers connect two computer diagrams

The broadband routing method is adopted. If you don't want to set it yourself, you can buy broadband and have your technician set it up for you.

At the same time, the benefits of this approach is stability! There is labor, you do not need to dial every time the Internet, which is the origin of the broadband route automatically for you to complete, and broadband routing and the disconnection function, save how much trouble? Next is security, the IP you are exposed to on the Internet is your routed IP, And not the IP of the machine itself, so that you are virtually protected.

There is no violation of telecommunications or netcom regulations, even if he restricted the MAC address is useless, because the route itself has a MAC address.

Steps/Methods

1, first the broadband cat and the router's WLAN port connection, you can use the Cat random band Cable.

2, connect a LAN port of the router with the upling port of the switch with a direct connecting wire. It also uses a direct connecting wire to connect the switch's ordinary port and computer. So the hardware environment is done. If your machine is less, also 2, 3 units, there is no need to add a switch, with a direct network cable will be a router LAN port and a computer connection can be.

3, first machine, set your network parameters first (right-click "Network Neighborhood"-"Properties"-right "local connection"-Properties-double click it after you find the TCP/IP protocol):

IP Address: 192.168.1.11

Subnet Mask: 255.255.255.0

Gateway: 192.168.1.1

DNS: Don't care about it.

Then "OK" all the way, reboot is required when reboot. But if you have any hints, you'd better reboot. The following diagram is set up the interface:

4, the second machine, such as the first, just the IP address into 192.168.1.12. By analogy, the LAN has been successfully formed.

5, set up broadband routing, I think there should be a manual, I just briefly introduce.

First find a machine, then open IE, in the address bar input: 192.168.1.1 after the return. Prompt you to enter username and password, see instruction manual.

Attention matters

Right into the routing configuration Interface, the Internet mode, if the ADSL dial-up select PPPoE form, then you need to enter your Internet user name and password. If you are directly assigning IP to select Direct IP form, please consult your ISP for details.