How tl-wr890n maps servers to the extranet

tl-wr890n Map Server to extranet step one, enter the Setup page

For example, a small business needs to open the Web server to the external network. Implement this requirement through the virtual server functionality. The user network parameters are as follows:

Server type external Port internal port

Web Server 808080

Open ports: Internet users access the port used by the server.

Note: The above parameters are only for the guidance of this article, please refer to the actual.

Login Router Management interface, click Application Management, access to the Application Center, the following figure

To find the virtual server, click Enter, as follows

tl-wr890n Map Server to extranet step two, add mapping entry

1, click to add

Click Add.

2. Add Mapping parameters

Enter the parameters for the server you want to map, as follows

External port: The external port is the open port, that is, the port used by the Internet access server.

After adding the list is as follows

At this point, the virtual Server rule settings are complete.

tl-wr890n Map Server to extranet step three, try to access virtual server

According to the above settings, access to the Web server through the browser, the following form

Note: The specific Access form is subject to the actual server requirements.

If your broadband is not a static IP address, you can apply for the domain name account in Dynamic DNS and login to the account in the router, and use your domain name and open port number to access the server after you log in.