Projector is now normal work in one of the commonly used equipment, for those who have not used the projector before, some simple settings are used in the process must be mastered.
1, the projector under the normal working state of the interface
2, connected with the computer and other devices, if the projector does not display the computer's contents, then may be the input method selection error.
(1) To see the connection between the computer and the projector is inserted in the rear of the projector which socket. You need to go to the Advanced menu in this projector's menu now.
(2) Find the "Input" option, select the Plug option after the projector, click OK. (General projector here has computer one, computer two, HDMI and other options, the user can choose as appropriate)
3, the projector after a period of time need to clean the filter screen, or will not stop pop-up prompts, after cleaning the filter network also need to use the following settings to empty the time, or the prompts will always appear, bothering users.
(1) Find the "Filter usage time" option.
(2) After entering the time "reset" or empty to "0" can be.
4, depending on the use of different environments, projectors may have different installation methods. Some will be directly on the table, and some hoisting in the ceiling, you can adjust the projection picture according to the setting of the positive and negative.
5, projector placement angle, the projection will appear on different shapes of the screen, if the width of the upper and lower widths, can be adjusted by "trapezoidal correction."