How the router restores the original factory password

How does the router restore the original factory password? below we introduce each of these two kinds of routers to restore factory set up method:

1, the router management sector to restore factory settings

If you sometimes feel that routers do not network, or routers are often unstable, then try to use this method, recovery is very simple, first in the browser to enter the router landing address (generally 192.168.1.1 or 192.168.0.1) and then open, and enter the user name and password of the router login (this router has a callout on the shell, such as modified, forget to use Method 2 general method). The following figure:

Login Router Setup Admin interface

Router management inside Restore factory settings

After we go into the router setup interface, in the most side of the bottom can be found in the "system tool" inside a backup and restore factory settings, we can click to restore factory set up operation, after the point of "Restore to factory settings" and then pop-up prompt box will ask you whether you are sure to restore the factory, we click "OK" can be, Wait a little while, the router will also restart, completed after the successful return to the factory settings.

2, through the router reset button to implement the router to restore factory settings (general)

After each router has a router reset button, its function is through this button to implement the router to restore the factory settings, such as many users forget the Router Settings management username and password, can not enter the router settings, then only through the router reset button, the router back to the factory settings, Then reset the router to the Internet.

The back of the router usually has a reset button, this button and the Reset key function on the computer is basically the same, usually a small hole, a few routers for a small button, the next callout has reset callout, it is easy to find on the router, the following figure:

Router Copy button (reset hole)

The correct steps to restore the factory settings through the router reset button are:

1, first unplug the router's power, and then use toothpicks or ballpoint pen point through the reset hole to hold the inside of the switch;

2, and then put the power to wait for a few seconds, at this time we go to observe the router led will find a few lights will quickly blink, and then about 5 seconds after the return to calm, at this time we send open toothpicks or ballpoint pens have been implemented to restore factory settings.

Router restore factory settings, landing router address and user name and password are restored by default, the general default router username and password are admin, you can see the router surface nameplate on the label can know, and finally we need to restart the router settings before you can access the Internet.