Preparation materials: Notebook Open cap screwdriver, alcohol, small brush, gauze, hairdryer with cold air, CPU thermal silica gel and roller oil.
2 Wash your hands first, let off the static electricity.
3 to ensure that the notebook is turned off, the power is disconnected, the first notebook computer out.
Core steps to clean up dust
Use a screwdriver to open the back of the laptop after the heatsink module screws apart, as long as the notebook to find the heat out of the tuyere location can find the direction of the CPU cooling module.
The notebook's heat pipe, heat fins, cooling fan and so on are removed and cleaned.
Pull out the power supply of the cooling fan 4PIN, then clean the dust after.
The core is the processor, with a tampon stained with alcohol to clean, you can clean off the original silicone, clean up and replace the new silicone.
Clean the cooling fan with a small brush, heat sink. Or get the faucet for cleaning. Then dry with cotton cloth, and then blow dry with a blow dryer, attention must be completely profession can be installed back.
After more than 6 cleaning, the cooling module back seat also clean, you can restore.