How to add a print server port under Win7

Printers are a very useful device in the company, and most of us are connected to our computers. So today the small compilation teaches everybody to add the print server port under the win7 system!

If your computer has been directly connected to a printer for printing and the printer driver is installed on your computer, now you want to use a print server to share your printer to your local area network, just change the printer's port to the standard TCP/IP port. The specific methods are as follows: 1. Click Start--Control panel--to view the device and printer.

2. Find the icon of your installed printer, right-click, and click on the printer properties.

3. Select port, click Add Port, select Standard TCP/IP port and click New Port.

4. Select Next in the pop-up window.

5. Enter the IP address of your print server and click Next.

6. Select Custom and click the Set button.

The protocol chooses LPR, the queue name is LP1, and it is checked with the LPR byte count enabled and clicked OK.

7. Click the Finish button to complete the configuration.

8. Click the Apply button and choose to turn off, you can use the print server to share the printer. (Must click Application to be effective)

Note: This document applies to the Single function print server (tl-ps110u, tl-ps110p, tl-wps510u) above eight small steps is solves in the Win7 system adds the print server port the method, is very simple, as long as the netizen earnestly goes to look after will certainly understand, This can be convenient for us to use the printer at any time you can operate!