How to clean the print head under XP system Epson

How to clean the print head under XP system Epson

The steps are as follows:

1. Open the printer, at the beginning--Set up--printers and fax machines to find the printer in use;

2. Click on the printer to be cleaned, you can see the following image of the interface, hit the red box as shown in the button;

3. Click to eject the Drop-down menu and select the Print Preferences button in the Pull-down menu;

4. Click on the printing preferences, will pop up the image shown in the interface, click on the back of the Advanced button;

5. This time will pop up the image shown in the interface, click the red box below the location, print nozzle detection pattern, to detect nozzle plug situation, and as cleaning nozzle after the contrast;

6. After the interface shown in the image below, click the Start Print button, print the nozzle test pattern, prepare a A4 paper in the printer;

7. Print out the test pattern, and then click on the design to clean the print head according to the need;

8. Then will pop up the image shown in the interface, click Clean to start the print head cleaning, after cleaning can repeat the above steps to test the effect after cleaning.