How to configure a vro effectively in a small LAN

I believe many of my friends have established small-sized local networks, especially in their homes. How can I configure routers? Next, we will explain this problem in several steps. Many families or student dormitories need to set up a small LAN to share Internet access, which is troublesome for users who have just been in contact, at least many people have asked me many times, or even one person has asked me many times. The following describes the networking process. Of course, there are many large LAN hosts. Due to different departments, VPN mode is often used and divided into several subnets.

First, connect to the broadband network. A host can directly dial up the Internet. After connecting, click the Start Menu, run, Enter CMD, and then enter IPCONFIG/ALL in the CMD window, this aims to get the DNS server address on the Internet and write it down. Then, disconnect the Internet and connect the WAN port configured by the cat and the router. Other interfaces are connected to each extension. The following describes how to configure extensions and routers.

Extension Configuration:

Click "Network Neighbor". Find the desktop in the Start Menu. Click "view network connection". If you do not know the window, click "zoom in".) Click "properties" to open a new window, double-click the internet protocol TCP/IP.

Configure the Intranet IP address. Fill in the default IP address structure of the 192.168.1.X router in the first entry. If it is a HUB, it should be in the form of 192.168.0.X.) The last X can be from 2 to 255, this is determined by the protocol itself. based on binary conversion, each extension should be different; otherwise, an IP conflict is prompted. The second option is the subnet mask. You do not need to enter it. Just click it. The third option is the IP address of the vro, that is, the Intranet gateway and 192.168.1.1. This is dead and cannot be another value, the DNS server address is the DNS address we started to obtain. Just fill in the address and confirm to save it.

The following describes how to configure a vro:

Open the browser, enter 192.168.1.1, press enter, and the following window appears.

Configure the WAN port. The first option is selected based on the situation. I have a wired connection and a dynamic IP address. Generally, the network is dial-up, such as China Netcom, China Telecom, or China tietong. Select PPPoe and enter the bandwidth user name and dial-up password. Configure the DNS address to be noted down. At this point, the vro settings are basically complete. If you want to perform detailed settings, I will not go into detail here. Of course, you can access the Internet now.