How to disassemble the rear flap of the chassis

Failure phenomenon:

The use of commercial desktops will be installed with a variety of PCI devices or the installation of independent graphics, the chassis need to remove the back of the block.

Reason Analysis:

At present, commercial desktop ship machine after the block has two, according to different pieces of the selection of different disassembly methods.

Solution:

1. Most of the Kai-Tian machine and part of the Yang-Tian machine (in fact, whichever) after the block is as follows:

See the case above the image, the block has a "screwdriver" icon. Just use a screwdriver to poke it out a little harder.

2. Most of the thinkcentre models and part of the Yang-Tian model (in fact, whichever) after the flap as follows:

The disassembly steps of this kind of flap are as follows: first, open the chassis and find the blue button at the back of the Block;

When pressed, the baffle above the flap will open;

Then pull the flap up in turn.

Note:

Wiring in the face of this problem, do not have the inertia of thinking without judgment on the use of screwdriver poke open block. The second kind of block material is hard, can not be stabbed open.