Transferred from: http://jingyan.baidu.com/article/9113f81b0192e72b3214c709.html?st=2&os=0&bd_page_type=1&net_ Type=1
When we need to complete the decomposition of physical forces in the CAD, we need to draw axes and other lines with arrows, but the cad inside is not with the arrow straight line, the following will be described in detail how to skillfully complete the drawing of the straight arrow in the CAD.
Tools/Materials
Method/Step
Open the CAD interface and click on the Construction Line tool on the left.
Select the endpoint where you want to draw the arrow line and finish drawing the line length.
After drawing the completed line, the next step is to draw the arrow section, with the command bar knowing that the width is press "W", enter "W" on the command bar and click Enter.
After the input w selects the width, to enter the selected starting width, in order to choose the appearance of the arrow as far as possible: 4 to 8 can be, depending on individual needs. Enter a number greater than 4 and click Enter.
Then enter the endpoint width, enter 0 for the endpoint, and then click Enter.
This completes the drawing of an arrow, and the drawing effect is as follows:
Below is the arrow effect when the arrow section is entered with a width of 8.
END
experience content is for reference only, if you need to solve specific problems (especially in the areas of law, medicine, etc.), we recommend that you consult the relevant professionals in detail. ReportAuthor's statement: This experience is based on the actual experience of the original, without permission, declined reproduced.
How to draw a straight line with arrows in CAD