How to connect two computers by direct network connection

How to connect two computers by Direct Cable Connection 1.making Crystal Heads

When connecting the two computers via a network cable, the Crystal Head connection of the network cable is: one end presses the t568a line sequence, the other end presses the t568b line sequence to connect. After the network cable is finished, the computer is connected by the crystal head of the network cable, so that the physical connection between the two computers is formed.

2.SetIP

The formation of physical connection does not mean that two computers can communicate, want to connect through the direct network connection two computers for data transmission, you must also make the relevant settings:

Set item	machine a	machine b
ip	192.16 8.1.2	192.168.1.3
subnet mask	255.255.255.0	255.255.255.0
Gateway	192.168.1.1	192.168.1.1

Select any value between 192.168.1.1 ——— 192.168.1.254 as the IP address of both computers, and the subnet mask for the two computers is: 255.255.255.0; Set the gateway for two computers to 192.168.1.1;dns server without setting, leave it by default. Examples are as follows:

3.set up sharing

The hard drive or folder you want to access your computer to is shared: the way to set up sharing is the same as in the local area network.

After the completion of the above, in the computer's "Network Places" can see each other connected computer, next can be like a local area network by direct network connection two Computers "copy-paste" to each other to transfer data.

It is also accessed using a mapped network drive:

\\192.168.1.3\ Local Disk (f) \ Tong Tong

How to connect two computers by direct network connection