How to reset the router

Broadband Router class:

1), with M1, M2 lamp tl-r4xx, tl-r4xxx new generation of internet cafes dedicated road and tl-fr5300 Firewall Router Reset method:

There is a small hole in the front/back panel of the router, there are words: Reset, turn off the power of the router, looking like the tip of the nib to hold the reset key, to the router to add electricity (still need to hold down the reset key), waiting for about 3-10 seconds, to M1 and M2 lights at the same time flashing three times can let go, reset success;

Attention:

After reset, the router will return to the factory setting, the default login IP is 192.168.1.1; The default username and password is admin/admin, please note that your computer's IP address is not in 192.168.1.X (X for 2--254) network segment!

2, with PWR, SYS lamp routers and tl-fwr1100, tl-fr1000 two firewall router Reset method:

Disconnect the router and press the reset button with a sophisticated object (such as a nib) to reseat the power supply (this process still needs to hold down the reset key) and release the reset button when the SYS LEDs blink. The router is then restored to the factory state.

Attention:

The power cannot be turned off until the router is fully booted, or the configuration may not be restored to the factory defaults. After reset, the router will revert to the factory setting, the default login IP is 192.168.1.1; The default username and password is admin/admin.

The Soho routers that use this reset method are: tp-r410+, tp-r460+, tp-r860+, tp-r1660m.

3), the individual router reset method:

tl-r420 Reset Method: Press the reset key about 2 seconds after release, the router will revert to the factory default value. Default Admin Address: 192.168.1.1, default username password: admin/admin;

tl-r400+ Reset method: Turn off the power, hold down the reset button, and then turn on the power (this process still needs to hold down the Reset key), about 5 seconds to release the button, the router will revert to the factory default value. Default Admin Address: 192.168.123.254, default username password: admin/admin;

tl-r400 Reset Method: Press the reset key about 2 seconds after release, the router will revert to the factory default value. Default Admin Address: 192.168.123.254, default username password: admin/admin.

Wireless class:

1), the wireless router Reset method:

tl-wr841n Reset method: In the case of continuous electricity, please press the reset button 3 times in 5 seconds. After that, the router will reboot and the router will successfully revert to the factory setting after the reboot. Tl-wr3xx/tl-wr5xx/tl-wr6xx Reset method: First turn off the power, and then hold down the Reset key, then turn on the power (this process still need to hold down the reset key), wait until the system light flash three times after releasing the reset button, the router will revert to the factory default value. Default Admin Address: 192.168.1.1, default username password: admin/admin;

tl-wr240+/wr2402.0 Reset method: In the case of power, press the reset button for about 10 seconds and then let go, the router will revert to the factory default value. Default Admin Address: 192.168.1.1, default username password: admin/admin;

wr245ver1.0 Reset Method: The power-on state, hold down the reset button for more than 5 seconds, the router will revert to the factory default value. Default Admin Address: 192.168.1.1, Default user password admin/admin;

wr245ver2.0 Reset method: Turn off the power, hold down this button, and then turn on the power, about 3 seconds, the system led first out and then on, the router will revert to the factory defaults. Default Admin Address: 192.168.1.1, default username password: admin/admin.

2), the wireless AP Reset method:

tl-wa501g Reset method: First turn off the power, and then hold down the Reset key, then turn on the power (still need to hold down the reset key), after 3 seconds, the system lights first out, the AP will revert to the factory default value. Default Admin Address: 192.168.1.1, default username password: admin/admin;

tl-wa200/tl-wa200+ Reset Method: The power-on state Press the reset button for 5-10 seconds, when the WLAN led from off to slowly shiny, indicating the success of the Reset, 3.0 version of the IP address is 192.168.1.100, the default username password admin/admin , and the 3.1 version of the IP address is 192.168.1.1, the default username password admin/admin.

Switch class:

Switch:

Switches with reset key: Tl-sl2210web, Tl-sl2218web, Tl-sl2428web, Tl-sl2452web, Tl-sg2109web, Tl-sg2216web, Tl-sg2224web. These switches reset method and the same as the reset method of the router: first power off, hold down the reset key do not let go, power at the same time, see all lights flashing that is reset success. The default admin address is 192.168.0.1, and the default username and password are supervisor/supervisor;

tl-sf2226p+/tl-sl2226p+ Reset method: Use TP-LINKSSU management program, click "Equipment"-> "restore factory settings", the switch will revert to factory defaults. The default management address is 192.168.0.100, username and password will not be restored, can also be connected through the serial port through HyperTerminal and telnet into the switch for reset operation. (Note: If the common user password forgotten, only through the super terminal through the Administrator password login, admin password factory set to: admin, and cannot be modified, login, you can directly modify the general user password)

tl-sf2108p,tl-sf2109p,tl-sf2808p,tl-sf2216p,tl-sf2224p,tl-sf2232p,tl-sl2226p,tl-sf2008,tl-sf2117p,tl-sf1016v, tl-sf1024v,tl-sg2008 Reset Method: This series of switches using the TP-LINKSSC program for management, do not need to use the user name and password can log in;

tl-sf3226p,tl-sf3008, tl-sf3117p, tl-sl3428, tp-sl3452, tp-sg3109, and some web-managed switch Reset methods: Connect the switch via serial port, use Super terminal to login the switch, Before starting the switch has a prompt interface, press ctrl-b key into the BootMenu, see "Pleaseinputbootrompassword:" After the direct return, and then in the appearance of the interface select " 3:restorefactorydefaultsetting ", restore the switch to factory settings, and finally select" 5:reboot "can be. The default administrative address is 192.168.0.1, and the default username and password are supervisor/supervisor.

ADSL Category:

td-w8900g/w8910g/w8920g Reset method: Disconnect the router power supply, with cutting-edge objects (such as NIB) hold down the reset button do not put, plug in the power, lasting more than 5 seconds, release the reset button. The router is then restored to the factory state.

TD-8820 Reset method: In the TD-8820 run, press the reset button with a cutting-edge object (Restore the Factory settings button), lasted more than 15 seconds. Loosen the reset button. The device will then revert to the factory setting. Note: The reset button cannot be released until the device is fully booted, otherwise the configuration may not be restored to the factory default value.

TD-8800 Reset method: In the case of continuous electricity, press reset key three times, all flashing lights, reset success. Default Admin Address: 192.168.1.1, default username password: admin/admin;

td-8810/td-8810+, td-8610/td-8610+ Reset method: First power off, then hold down the Reset key, and then turn on the power supply, wait about 3 seconds, reset success. Default Admin Address: 192.168.1.1, default username password: admin/admin;

td-8830/td-8831 Reset method: In the case of constant electricity, hold down the reset key for 10 seconds, then release, reset success. Default Admin Address: 192.168.1.1, default username password: admin/admin.

Print server:

tl-ps110p/ps110u Reset Function Key, click the Reset key will reboot.

tl-ps110p/ps110u Reset method: The first power off, and then hold down the reset key does not let go at the same time the power wait 5 seconds after the drop, that is, restore factory settings. The admin password reset will become an initial password-Free state. The IP address of the tl-ps110p is not restored to the default of 192.168.0.10, but remains the last configured IP address. Note: The tl-ps110p of the reset button on the side, the reset hole is relatively small.

tl-ps210u Reset Method: Disconnect the power, hold down the Reset key, and then connect the Power 5 seconds after releasing the reset key, will make the Print server restore factory defaults, IP address will return to the default IP address: 192.168.0.10.

The default IP address for this multifunction print server is 192.168.0.10 (default value). Before using, determine whether the IP address of the computer and print server is the same network segment.