How to resize a hard disk partition

Win8 also appeared for some time, had installed in the virtual machine played, feel bad, and then put the win8 into the VHD, and then Mount started, successful, but in the system installation application, reported the following error.

Using a VHD mount to start, two times, the same error is reported when installing the application. Initially thought it was a problem with the installation package, and later installed in the virtual machine for testing, found that the installation package is not a problem, in the virtual machine is normal, on the colleague computer also installed this version of the small 8 (installed on the physical disk), Also did not reflect the failure to appear, so my judgment is that win8 in the VHD is not swollen, so do not toss.

As a result of the original system disk partition only 30G, installation Win7 just barely enough, but the installation of small 8, afraid to bear, so think of the adjustment zoning, to C disk capacity, as a result, the new round of the war on the non-destructive zoning opened the prelude.

1, open the tool, at the partition point you want to adjust right click "Resize Partition", the following figure:

2, select the partition you want to adjust again, and click OK.

3, the most important step, set the adjusted capacity and position, action, and so on, and then press "Start" can be.

You will be prompted to reboot the system and switch to DOS mode, you only need to follow the prompts to restart, the process will take about more than 10 minutes, please be patient, adjust after the completion of the automatic restart, once again into the system you will find the successful implementation of the lossless partition, the following figure:

Original Partition size:

Adjusted partition size:

Is it simple? All you have to do is just drop a few clicks.

Warm hint: For the sake of safety, when doing the operation, please make a backup of important data in advance, just in case.