TP mini supports wireless routing. After this feature is enabled, other wireless terminals can connect to the wireless signals sent by TP mini and share the network services of TP mini.
The following describes how to use the wireless routing function of TP mini.
1. Open the Settings page.
Go to the main interface of TP mini and open "settings ".
You can see that Ethernet and PPPoE are enabled, and TP mini uses PPPoE to dial up the internet. If wireless routing is enabled at this time, other wireless terminals can connect to the TP mini wireless signal to access the Internet.
2. Enable wireless routing
Click to open the "wireless routing" function item setting interface and check "wireless routing.
3. Set a wireless route
Click set wireless route.
The "network SSID" is the wireless signal name, which can be customized and modified.
We also need to set a wireless password, click "security", and select an encryption method. In this example, the value is "WPA2 PSK ".
Enter a password of no less than 8 characters and click finish.
Click save.
Now, the wireless route settings are complete. You can view the wireless terminal information in "wireless route connection status.
Note: The wireless routing function can only share Ethernet network services, but cannot share Wi-Fi network services. Wi-Fi and wireless routing cannot be enabled at the same time.