How to set up the Tp-link wireless router

1, the first is the connection problem of the network cable, as shown in the following method to connect well, and power on the router to open. Although it is a wireless router, the initial setting is to use network cable to connect to the computer bar;

2, into the "Network and Sharing Center", right click on "Local Connection" and select "Properties" pop-up "Local connection Properties" window;

3, then select "Tcp/ip4" and click "Properties" to ensure that the current set to "Automatically obtain IP address";

4, now you can login to the router to set up, open the browser, enter 192.168.1.1, enter the login account and password. Turn over the router, view and note the bottom nameplate on the management of the information, the above has the management of IP, user name and password;

5, enter the router's management interface, click the "Setup Wizard" to enter the wizard installation interface;

6, in the "Internet mode" selection, according to their actual situation to set up, the general dial-up use of PPPoE way, if not clear their own way to access the Internet, you can try to use the "automatic selection", if you still can not correctly identify the Internet, please contact the network provider;

7, then enter their own broadband account and password and click "Next";

8, the next step is to set the wireless router SSID (wireless network name) and password, generally set a better memory of the wireless name, wireless password as far as possible to set the complex point to prevent others to crack;

9, after setting up, click Next to complete the installation, and then restart the router. At this time if it is directly connected to the computer network can directly access the Internet, mobile phones, notebooks and other wireless networks need to search WiFi, enter the correct password, you can use.