How to set up tp-link885n wireless bridge

tp-link885n Wireless Bridge Setup Method

First step, confirm the main router wireless parameters

To confirm the need for bridging the signal parameters, that is, the main router's wireless signal name, wireless password, this article uses the following parameters for example:

Note the problem: the main operation of wireless bridging (WDS) is performed at the secondary router.

Step two, log on to the tl-wr885n (Vice) router Setup interface

1, open the browser, in the browser address bar input tplogin.cn, followed by the ENTER key, and then enter the Tp-link tl-wr885n wireless router login password Settings window. (Sometimes we successfully install the router, will automatically jump to set the login password window, if encountered tplogin.cn can not open the situation, please click to read:>> Tp-link router tplogin.cn can not open how to solve?)

2, after the "Set password" box for the Tp-link tl-wr885n wireless router set the login password, in the "Confirm password" in the password again, click "Confirm".

3, enter the Tp-link tl-wr885n wireless router shortcut settings interface, waiting for detection prompts.

4, after the detection of installation completed, directly select the "Skip Wizard" into the Tp-link tl-wr885n wireless router settings interface.

Step two, tl-wr885n Wireless bridge settings

1, in the following navigation bar to find and click "Application Management", in the application of the right to find "wireless bridging" function, and then click the corresponding "Enter" button below.

2, click "Start Setting", as shown in the following figure:

3, search to the main router wireless WiFi signal, click on the selection, and then in the pop-up input main router wifi password input box to enter the main router wireless wifi password, finally click "Next", followed by the Connection Status prompt box, as shown in the following image:

Note: If the main router signal is not scanned, verify that the primary router is on the wireless feature and try to reduce the distance between the primary and secondary routers.

4, Confirm management IP address: The main router will assign an IP address to the secondary router, for subsequent management of the router, it is recommended to write down the IP address, click "Next".

5, here we can choose to this router (tp-link tl-wr885n wireless router) wireless WiFi name and password and the main router consistent, of course, we can also customize the settings, as shown in the following figure:

Note: Here you can set the wireless parameters of the secondary router, but if you want to achieve wireless roaming, you must maintain the primary vice.

Step fourth, confirm that the TL-WR885N Wireless bridge is set up successfully

Once again in the application management--> Wireless bridge, you can see that the bridge status is bridged successfully. As follows:

This tl-wr885n wireless bridging (WDS) Setup completes, the wireless terminal connection corresponding wireless name, the wired computer connects the main, the auxiliary router's LAN port to be able to surf the Internet. In the process of terminal movement, automatic roaming between main and secondary routers can be realized.