1. Set machines
IP
Address.
After the IP address is queried, follow these steps:
1. In normal standby mode, press the Menu key on the machine panel, press the left arrow to find the Network, and press OK ].
2. Select "TCP/IP (IPv4)" and click "OK ].
3. Select static and click OK ].
4. Select IPv4 Addr and click OK ].
5. Enter the IP address and press OK ].
6. Enter the subnet mask and press OK ].
7. Enter gateway and click OK ].
After completing the preceding settings, proceed with the following operations.
2. Install the network printer driver.
1. Install the random built-in CD. If the CD cannot be found, you can download it from the Vivo official website.
Driver Download link:
Http://downloadcenter.samsung.com/content/DR/201210/20121025154821090/Samsung_CLX-3300_Series_Print_V3.11.76.01.25.exe
2. Open the installer and select install now ].
3. Click [next] next to [I accept the terms of the license agreement ].
4. Select whether to send the printer information. Select the printer information as needed. Click next ].
5. Select network connection and click next ].
6. Confirm the device connection and click next ].
7. Click "find printer" and click "next ].
8. Select the software and utility to install and click next ].
9. When "set printer driver" appears, click "next ].
10. The "smart update" page appears. Select whether to update the page based on your needs. If it is not updated, the installation will not be affected. After the selection, click [next ].
11. Wait for software installation.
12. After the installation is complete, select print test page. The machine prints a test page, indicating that the network connection is successfully printed. Then click finish.
