first, understand the Power cat interface
There are not many interfaces on the power cat, and the main routing device usually has only one WAN interface and one LAN interface, as shown in the following illustration.
Some of the better power cat WAN Port can also be used as a LAN, such as the above the Huawei Power cat used this design, convenient wired to connect more computers.
II. installation and connection of power cat
The power cat and the Extender need to be fitted to the code before the Power cat is installed
Pairing diagram of Power cat
The following mainly describes how the power cat and cat, computer and other equipment connection.
1. If you are using a telephone line, that is, the ordinary dial-up Internet, then the external network cable first inserted "cat" telephone line interface, and then use network cable, the cat's network interface with the power of the cat's WAN connection, and the LAN port of the Power cat, with a network cable and computer connection can be shown in the figure diagram below.
Power Cat Installation and connection
2, if the community broadband or optical fiber users, if there is no cat, the external network cable directly into the power of the cat's "WAN" interface.
Next up is the Power cat settings, which are set in the same way as the router