| How to install a system with a USB flash drive ● Preparations before installing the system A USB flash drive that can boot your computer and a system CD image Prepare something before installing the system. One is the operating system image, and the other is the U disk that can be started. Next we will explain how to install the deepin XP system. Note: to read this article, you need to understand some basic knowledge about operating system installation. ● The first step is to create a boot USB flash drive with windowspe to enable the computer. First download a tool named "old peach winpe" to the hard disk, then connect the USB flash drive to the computer, and then follow the steps below to create a boot USB flash drive. Select 4th items and press Enter.
Enter the drive letter of the USB flash drive and press Enter.
In the formatting step, click "start" on the default settings.
Smooth formatting
Guide
It should be noted that there are two options in the "device": one is the hard disk of the computer and the other is the U disk to be made. You must select the right USB flash disk instead of the wrong hard disk. The size of the USB flash disk can be determined. The author's USB flash drive is 2 GB, so we should choose (hd1) [1898 M]. You can skip the "options" section below. By default, no parameters are selected. After confirming the above steps, click "Install" and then proceed to the next step.
After writing the boot, press any key to continue.
Set a password for the USB flash drive.
I didn't want to set the password for starting the USB flash drive, but this step cannot be skipped, so I had to set a password. After setting the USB flash drive, remember the password you set. Otherwise, the USB flash drive cannot be used.
Finished
After completing the above steps, congratulations, a USB flash drive with the startup function has come to your side. You no longer need to worry about starting the drive from the drive, because you can start the drive from the USB flash drive and then install the operating system! Do you want to know how to perform this operation? The next page begins.
●
Set the first boot item of the computer to start the USB device. ●
Install XP with an Enable USB flash drive First, connect the USB flash drive with the boot function to the computer.
Start the computer
After starting the computer, you will be asked to enter the password for starting the USB flash drive, that is, the password you set when creating the USB flash drive. After you enter the correct password, you can see a selection menu and select "winpe by: maotao ". Enter winpe
Then, a mini operating system winpe running on a USB flash disk (not a computer's hard disk) is displayed. It has many functions similar to XP, with it, we can do whatever we want on the computer.
You can format disk C.
How can this problem be solved? Can I directly format the drive C? Before installing the new XP, We must format the drive C. After formatting the C drive on the computer using the winpe on the USB flash drive, ask the virtual optical drive for help. The winpe running on the USB flash drive comes with a virtual Optical Drive.
Image for loading an XP CD
We chose a ghost image produced by deepin, which was created by the famous "8-minute quick release version 6.5. If there is an optical drive, you only need to put the "8-minute fast install version 6.5" disc into the optical drive and install it directly. However, because there is no optical drive, we have to pay some twists and turns to install this system.
After a system image is loaded with a virtual optical drive, one more drive will be generated.
We can see that after loading the system image with a virtual drive, there is a GHOSTXP-6.5NTFS drive letter in the "my computer" directory. This is the location of the system to be installed.
Start ghost of winpe
Next we start another software, Norton Ghost, that comes with winpe. Use it to restore the system's ghost image to the C drive of the previously formatted computer.
The process is no different from that of using ghost.
After the ghost is started, the usage is no different from the usual use of ghost to restore the system. Select from image first, find the CD directory loaded by the virtual optical drive, select ghostxp. gho, select the hard disk to be restored, and then select the partition to be restored.
Click Yes, just wait until it is restored.
After the preceding settings are selected, a dialog box will pop up asking you if you want to restore the specified gho image to the C drive of your computer. Click Yes.
Restart and enter the system. The reinstallation is complete.
After the ghost image is restored, You can restart the system. Now, the operating system has been installed with a USB flash drive! You can forget the troubles of installing the operating system without the optical drive.
It is worth mentioning that, because the entire process is to read data from the hard disk, the installation speed is much faster than the installation speed with a CD. In fact, this is only one way to install the system with a USB flash drive. There are many other ways to install the system. This article will not give an example one by one. You may have noticed that with this USB flash drive, you do not have to worry about the system crash. After the important information is stored in drive C, it cannot be saved, because as long as you use the USB flash drive to start winpe, you can back up important data to other partitions. It is hoped that netizens can use winpe, a very useful tool installed on a USB flash drive, to draw a line between them. Winpe stands for Windows preinstallation environment, which is a Microsoft Windows pre-installation environment. It is a Windows XP Professional tool running in protection mode and has only a few (but very core) the Win32 subsystem of the service. These services provide Windows installation, network sharing, automatic underlying processing, and hardware verification.
Winpe allows information technology (IT) personnel to build custom solutions and accelerate the desktop deployment process through automated operations so that they can keep their desktops updated with less time and effort. Windows PE can run Windows Installer, script, and image production applications. "Enterprise Agreement (EA)" and "Software Assurance membership (SAM)" customers have obtained windows PE in the October 2002 update, it will continue to be provided to users as a "software guarantee.
Winpe allows you to create and Format hard disk partitions and give you access to NTFS file system partitions and internal networks. This pre-installation environment supports all large-capacity storage devices that can use the Windows2000 and WindowsXP drivers. You can easily add drivers to new devices. Supports copy, delete, and partition formatting of fat, FAT32, and NTFS system partitions.
Using winpe can help you convert existing MS-DOS-based tools to 32-bit windows APIs so that you can easily maintain these applications in standard development environments (such as Microsoft's Visual Studio. Windows PE hardware diagnostics and other pre-Installation Tools support standard Windows XP drivers, and you do not need to do anything special. For program developers, they can focus on the diagnostic, debugging, and development of the program.
Winpe can also be understood as a small Windows XP SP2 system. Like a common Windows operating system, winpe can be operated with a mouse, with a start menu, a desktop ......, How to enter winpe? Very simple. First of all, you need a winpe Cd (in fact, there are hard disks and USB flash disks. I won't talk about it here ). Put the CD in the optical drive, set the boot sequence in the BIOS to the priority of the optical drive, and start the computer. In this way, select as prompted, and then enter the winpe system. After a Windows XP-like startup interface, you finally get to the familiar Windows desktop. At the same time, you will realize that you have completed such operations on a CD. |
