Make this slide, the trigger is applied with a total of four small graphs (x1 x2 x3 x4) and the corresponding four-figure (D1 D2 D3 D4), the small figure has no entry and exit actions, the large image is triggered by clicking the small image, and the exit is triggered by clicking itself.
All eight images overlap on one slide, so use the Select multiple object buttons to make it easy to select.
More than one object button in the lower right corner, as shown in Figure 1, if not, can be removed at any time, click the Tool option button next to Figure 2, expand the Add and Delete submenu as shown in Figure 3., check Select multiple object buttons.
The production process is as follows:
1 Insert four pieces first, in the order of X1, x2, x3, x4. and insert a two text box,
In the selection of multiple object interface, and X1, x2, x3, x4 corresponding object is picture 4, picture 5, picture 6 and picture 7. As shown in Figure four:
2) According to D1 D2 D3 D4 of the sequence of inserting four large map, in multiple object interface, and D1 D2 D3 corresponding object is the picture 10, picture 11, picture 12, picture 13. As shown in Figure V:
3 in Figure v Selected picture 10 (ie big figure D1), add into Custom animation, select X1 as trigger on D1 Timer interface, and click OK as shown in Figure 6
4) and then add the D1 exit Custom animation. The D1 itself is selected as the trigger, and the D1 entry and exit are set after the confirmation, as shown in Figure 7
The following settings for the D2 D3 D4 refer to 1) 2) 3 4).
Finally, as shown in Figure 8
Because a trigger is used, clicking must be on the object, and if there are multiple slides, such as clicking in the page blank, switch to the next slide. Because a trigger is used, you can click the object arbitrarily, unordered, and can be clicked repeatedly.