How to open the Administration page for the Win7 router

1. First check whether the installation of IE agent, the specific method: first open IE browser, click the "Tools" select "Internet Options--Connection--" LAN settings, and then determine the proxy server "for LAN use proxy server" option is not checked, If checked, cancel the check.

2. If the previous normal landing, now landing can not, then also do not rule out the possibility of other changes in the router configuration or the default 80-port caused by the attack, the solution: Restart or reset the router, the router's management port, user name, password, and so on to modify.

3. If the user to the router's management port has been modified, then the next landing will need to Http://LAN mouth ip:xx way to login, XX for the new port number, such as: http://192.168.1.1:8080;

4. If the reset is not able to log in or just start landing, but after a period of time can not login, then it is likely that the ARP deception, the solution is: to find the source of deception, killing virus or isolate it.

5. If this occurs for the first time using a router, confirm the following two points first:

① Check whether the network cable is connected to the correct port (LAN port), and then the corresponding network card light and router corresponding LAN port lights are normal.

② confirm that the IP of the computer is the same network segment as the router LAN port. For example, when the router management address is 192.168.1.1, subnet mask: 255.255.255.0, the IP address of the computer should also be set to:

192.168.1.X (between X 2-254), as shown in the following figure.

Warm tip: Generally after the above settings can open the WIN7 system Router management interface, if you still do not solve the router landing problem, then please restore the router to the factory settings can be.