How to operate the Control Panel to immediately shut down the P5 Server

Environment:

P520, p550, p570

Problem:

The P5 server is not connected to HMC. For some reason, the system cannot log on. You need to restart the server. In this case, the power switch on the control panel does not work. What should I do?

 

 

Answer:

Use Function 8 on the Control Panel to immediately shut down the server.

 

 

Procedure:

A. Use the <strong> or <strong> button of the Control Panel to select function 2.
The Panel is displayed as follows:
02 ______________
________________

B. press <→> to enter function 2, click <→>, select N, and use the <strong> or <strong> button to convert N (normal) to M (maual) 2 times <→> exit function 2.

C. Use the <strong> or <strong> button to select function 8.

D. Press <→> to go to function 8. When the panel displays 11 a1xx 8008, you have selected function 8. XX is 0 ~ 9 or ~ Any character of Z

 

E. You need to go to function 8 again, indicating that you are sure to shut down the server

F. Wait until the power indicator turns slowly blinking and the server is shut down.

G. press <→> to enter function 2, press <→>, select m, use the <strong> or <strong> button to set m to N and press it twice <→> exit function 2.

H. Select function 1 to enter the normal operation mode.

 

Http://skilaqi.blog.sohu.com/115569045.html