How to perform firmware upgrades for HP Designjet Z5200 in your computer

HP Designjet Z5200 is a large-area printer that requires users to print on a large-screen printer in a special case. And sometimes you need to upgrade your HP Designjet Z5200 printer, so how do you do it? A friend in doubt can then refer to the following steps.

1, in the IE Address bar input Z5200 IP address, into the EWS interface, click Settings-Firmware update-select files;

2, browse to the firmware folder, select the. fmw file and open it;

3, then click on the bottom right corner of the "update";

4, add firmware files can be updated after the firmware;

5, notice in the upgrade firmware process, do not operate the printer, and do not send any print jobs to the printer, upgrade halfway printer can not power off, data transmission is completed, the printer will enter the status of the update, will show the upgrade progress bar, after the upgrade, the printer will restart.

This is the way to perform firmware updates on HP Designjet Z5200 in your computer.