How to put a computer film on a liquid crystal display will not have bubbles

Inferior liquid crystal Protective film affixed to the screen, there will be a lot of bubbles, directly affect your vision. And the wear resistance is not high, the use of liquid crystal Protective film is very short. The liquid crystal Protective film with poor transmittance will damage the eyes, the following is the correct film-sticking step:

1. Please read the installation instructions on the packaging, compared with the size of the LCD protective film and screen size is consistent;

2. Try to find a less dusty environment, this product consists of three layers of film, affixed with "(1) hand-torn label of a layer can be stripped of the protective layer, there is no labeling of a layer of protective film; the last peel off the film (2).

3. The screen protection film and the removable protective layer of the contact side of the installation is affixed to the screen surface;

4. Be sure to wipe the surface of the LCD screen clean, do not have obvious dirt, especially do not leave granular material, there will be particles of dust bubbles;

5. As a result of computer screen protection film using anion electrostatic adsorption technology, tearing off the protective layer will be adsorbed after the small dust in the air, so it is recommended to peel off the protective layer as soon as possible within a short time after a successful installation;

6. Paste Liquid Crystal Protection Film film Operation speed not too fast, tear the heavy paste do not tear too fast, to prevent the liquid crystal protective film deformation;

7. Paste the liquid crystal film in the process of producing small bubbles can be squeezed with a soft cloth, but also let it disappear naturally;

8. If you want to tear off, you can use Scotch tape to stick to a corner of the protective film slowly.

Notice: Screen protection Film electrostatic adsorption, no other viscous substances, please try to avoid the use of sharp items scratch protection stickers, please ensure that the LCD protective film before the screen cleaning; do not fold or distort the LCD protection paste or distortion resulting in creases or deformation caused by the formation of the adhesive.