How to quickly install Win7 with solid-state drives (graphics and text tutorial)

solid-State hard disk installation platform has the advantages of speed and reaction speed, many users also buy a SSD as a system disk to use, then how to install the system simple and fast become a user must face a problem. The following small series using a 240GB SSD solid-state hard disk installation Win7, using a U disk for solid-state hard drive system, installation time with less than 10 minutes, solid-state hard drive system is fast enough.

　　SSD installation system does not ask for 9 minutes u disk Fast install win7

At present, through the USB boot installation system by more and more users accepted, USB disk installation system than CD-ROM to carry and save more convenient, today we chose a U disk installation Windows7 system mode.

　　Prepare u disk and Solid State drive

Ready tools can be the next step of the operation, remember U disk capacity must be greater than 4G, after all, a system image file is close to 4 G, otherwise it will not be happy to proceed to the next step.

　　Win7 system mirroring write boot Disk production

We made from the system USB drive is said, we just find a 4GB capacity above the idle USB drive can be turned into a replacement for the optical system installation.

　　Windows7usb/dvddownloadtool

Online related Win732 bit/64 official image Download a lot, readers can download and follow the article together to write a mirrored file in the disk, the author will also introduce a USB boot production software, compared with other written procedures more quickly and safely.

This software is issued by Microsoft specifically for the installation of the system via USB interface or DVD-ROM to install the file compression write tool, users can write the CD or write a DVD to complete the system installation disk production.

　　Windows7usb/dvddownloadtool

Select the scene file address you want to add.

　　Add a downloaded Win7 mirrored file to your program

　　Select Usbdevice Start Mirror Write

　　Select the letter you want to install and click "Begin" in the lower right corner.

　　File Start Import

After waiting for the completion of a USB system boot disk is made, this software operation is not very simple, with this tool we can proceed to the next step.

　　BIOS setup

After the solid state drive is installed, we can turn on the power supply, and it is important to note that if you find that your computer does not automatically recognize the USB boot entry. We need to change some of the settings in the BIOS. Because the motherboard's BIOS setup screen is different, if your new solid-state drive is not recognized when installed on the computer, we can change to "IDE" mode.

　　The Author computer BIOS setup interface

So where is the difference between AHCI and the IDE? AHCI is a new interface standard under Intel's guidance compared to the latter IDE, which is essentially a PCI class device that, if there is no system in the solid-state drive, may cause the computer to fail to recognize the solid-state hard drive interface. We have to manually change the BIOS settings to get it back under the IDE interface.

　　Identify the USB boot entry

Through the modification of the IDE/AHCI interface, SSD can be identified again, if your computer can not start through the USB interface, you still need to change the startup items, set up in the BIOS, in the Boot Board screen prompts to press "F12" to enter the starting item to modify the screen.

　　Win7 System Selection screen and partition

　　Win7 System Selection Screen

　　Partition settings

If you are making the solid as a partition from the disk in the system, you will find that the 100MB space that the system retains in the diagram is not partitioned. This type of zoning and the use of the relevant zoning software for the first Division are the same, although the system to retain 100M space does not have much practical significance, but still for the sake of security, the author recommends the use of installation system provided by the Division method is the most reliable way. If your hard disk itself already has a partition letter, again, you can choose to repartition, format, or merge partitions as you wish. And in this way, the hard disk can be directly carried out 4K sector to its work, eliminating the user's concern for zoning.

After the partition work is done, we will formally enter the installation interface of the system. I also took out the stopwatch from "file expansion" to start doing time calculations, to see when the Win7 Start screen generation, we use the USB drive installation system method will take how long.

　　9 minutes, 16 seconds.

The whole system installation time takes about 9 minutes 16 seconds, make a U disk System Installation tool, can quickly and conveniently help oneself or Meng sister paper installation system. Of course, if you want to talk with sister paper for a day or something, you can pretend to have trouble to extend the installation process time.