If there is a dxperience source generation, the following methods are obtained from the Internet for personal research, for business applications, please refer to the original version of the estimated version of the original address http://www.devexpress.com using method ① To devexpress. key, using Sn-K strongkey. SNK, generate your own Sn; ② use VS 2005 to open the targets under the root category of the source code, the following describes how to perform the following operations to import an assembly from VS 2005 toolbox and GAC into VS 2005, select the corresponding tab or component in the toolbox, divide ② into % WINDOWS %/assembly, and change devexpress. xxx. in v6.2 assembly, all except adding DLL after adding our existing DLL to GAC and VS 2005 toolbox ①, We will generate the Program program into % Program Files % developer Express. net 2005 v6.2/sources/devexpress. DLL under (override) ② change the devexpress. xxx. drag and Drop the v6.2.dll file to % WINDOWS %/assmebly to add it to GAC. 3. Enter VS 2005, create devexpress on toolbox, or use the original tab, add the control worker to Toolbox ④ and re-import the control worker to VS 2005. The main difference is that devexpress does not provide its Sn scheme, the publickey of the sns generated by us is different from the estimated version. Therefore. from the Net Framework perspective, two different toolbox sequences of Assembly VS 2005 Retain references to the original sequence. If the toolbox is not re-inserted, when a control is added to the form, its reference cannot be added, which leads to a temporary problem (of course, you can also manually add the root cause prompt) netken