How to select the deployment mode of Internet behavior management software to realize network monitoring

Tiancheng Internet Behavior Management software has four deployment modes, which are suitable for different network environment, this article introduces the advantages and disadvantages of these four deployment modes, for users ' reference.

System Requirements: xp/2003/vista/2008/win7 (32/64-bit operating system can)

Because the day easy into the Internet behavior management software is the management of Internet behavior, it requires a computer to access the Internet.

Mode: ARP Gateway recommended use!

Advantages: No need to change the network topology. The monitor can be turned off and the network is restored to an administrative state.

Disadvantage: only suitable for single segment environment, the number of managed machines is best not more than 200 units.

Requirements: The router cannot open the ARP firewall and cannot do ip-mac binding. The managed computer cannot open the ARP firewall and bindings.

Mode: Network Bridge mode recommended use!

Note: must first set up a good network bridge, and then install the day easy into the Internet behavior management software. Remember!!!

Advantages: Applicable to any network environment, powerful, can break through the ARP firewall for management.

Disadvantages: None.

Requirements: A computer with dual network card placed between the router/firewall and the switch, and on this computer Configuration Network Bridge, install software.

Mode: Dual Network card Gateway

Advantages: Applicable to the network at the exit of a computer dial-up agent on the Internet, the function is very strong, can break through the ARP firewall to achieve all functions.

Disadvantages: None.

Requirements: Need a computer to do the gateway, the monitoring software installed in the Export Dial computer office.

Mode: Single network card gateway

Benefits: Fully manage computers that use the ARP firewall. Only need to modify the gateway/router IP.

Deployment: Example: Network original gateway ip:192.168.0.1, intranet computer ip:192.168.0.x;

1. Modify the original gateway IP for unused IP, such as 192.168.0.254;

2. Modify the default gateway of the monitoring computer for the new gateway ip:192.168.0.254;

3. In the Monitoring computer IP properties of the Advanced page to add the original gateway ip:192.168.0.1! must be shown in the following image of the native IP in front, the original gateway IP in the post!

4. Monitoring computer installation days easy to network management, select a single network card gateway, the parameters set up the original gateway ip:192.168.0.1;

5. After the first start of management, the use of ARP firewall computer, must restart once;

6. If the network is a DHCP environment, it is necessary to shut down the DHCP of the original gateway and open the DHCP service in the network in the day easily.