How to set a tplink wireless router

First, if there is a wireless router, first connect the power supply, then plug in the network cable, line into the wan port (generally blue port ), then, the network cable connected to the computer is connected to any lan port.

Enter vro address

Step 1: After connecting to the wireless router, enter the address displayed on the router in the browser, which is generally 192.168.1.1 (of course, if your home is using a telephone line to access the Internet, you need to prepare another modem, "Cat ").

Enter the corresponding account password

Step 2: After entering, you will see the corresponding account and password. Generally, admin is the new account.

Select setup wizard

Step 3: Go to the operation page, and you will see a setup wizard on the left ).

Enter the Settings Wizard interface

Step 4: go to the configuration wizard page.

Set the access method

Step 5: click next to go to the Internet access method settings. We can see that there are three ways to access the internet. If your home is dialing, PPPoE is used. Dynamic IP addresses can be used directly by computers through the network. The upper layer has DHCP servers. Static IP addresses are generally leased lines or residential bandwidth. There is no DHCP server on the upper layer or a fixed IP address is required. I chose pppoe for dialing.

Enter account password

Step 6: If you select PPPOE for dial-up Internet access, you need to fill in the Internet account and password. This should be clear to everyone. You will have an account and password when activating broadband, and it will be OK if you fill it in.

Set the vro password

Step 7: Go to wireless settings next to the next step. We can see the channels, modes, security options, and SSID. Generally, the SSID is a name. You can enter it as needed, then the mode is mostly 11bgn. wireless security options we want to choose wpa-psk/WPA2-PSK, so that security, so as not to let people easily crack the network.

Set successfully

Step 8: The configuration is successful in the next step.

Automatic router restart

Step 9: click finish and the vro will automatically restart. Please wait. The interface that appears after the operation is successful.

The initial user name and password for the TP-LINK router: the user name is admin password is blank or is also admin

The default address is 192.168.0.1 or 192.168.1.1.