How to set the U disk as the first boot

In the use of U disk PE system reload system, you need to set a U disk for the first start . To allow the computer to boot from the U disk, we usually adjust the computer's startup via the BIOS interface. Before we mentioned in the tutorial how to enter the computer BIOS setup interface. If you are not clear, you can see: U-Disk Installation system BIOS startup settings. After entering the BIOS interface of the notebook, how to set the USB disk to start ? The following small series takes my own computer for example. Of course, before setting, please plug the made USB disk into the computer. The key for my desktop to enter the BIOS is F12.

1

Turn on the computer and press F12 after the boot and go to the BIOS interface. The following figure:

2

Some of the above images may be less clear on how to select the boot menu, usually through the left and right buttons on the keyboard.

Here we can see the boot Setting, which is the startup setting. Set the priority of the startup in the boot Device priority. Move the up and down key, select to boot Device Priority, and enter return.

3

Note, please see if your USB drive is plugged in on the computer, if not, please start from reboot starting from the first step into the BIOS. The following image can be seen I inserted a Kingston u disk. I passed the "+", "-" on the keyboard and let my USB drive show up in the first place.

Note: Most computers are unable to adjust through "+" in the BIOS. At this time, we can through the "-" the other non-U disk down, let U disk display in the first place.

4

Finally, when you set the U disk in the first place, you need to save the settings and exit. Press F10 to exit the save, or save it from the "Exit" menu above.

The

needs to be explained that, due to the different motherboard model, your BIOS interface may not be the same as mine, for example, my office desktop is ASUS Motherboard H61, his BIOS interface is very gorgeous. Adjust the start sequence is also very simple, directly below the mouse drag a U disk to the front can be. Let's set it for your BIOS. In the Save exit reboot, the U disk is still to plug in the computer, can not pull down oh.