How to set up a SOHO broadband router

I. How to configure SOHO broadband routers
The SOHO broadband router is configured through a Web browser. First, check the IP address, logon username, and password of the broadband router. The information is usually written under the router or in the instructions in the box. (The IP address is 192.168.X.1, the user name is admin, and the password is admin.) use a straight-through twisted pair cable to connect the Nic of the computer to any lanport of the broadband router.

II. Configuration steps
1. Use twisted pair wires to connect a computer's Nic to any lanport of the broadband router. Power up the router.
2. Configure the IP address of the computer. Make the IP address of the computer and the IP address of the router in the same network segment. For example, if the IP address of the router is 192.168.1.1, set the IP address of the computer Nic to 192.168.1.2 and the mask to 255.255.255.0. If the DHCP service has been enabled on the vrodhcp, we do not need to configure an IP address for the computer, so that the DHCP server of the vrodhcp assigns an IP address to it. To configure an IP address for a computer, follow these steps:

Figure 1 right-click "network neighbor" and click the "attribute" command item on the shortcut menu to open the local connection

Figure 2 right-click "local connection"

Figure 3 locate and select "Internet protocol (TCP/IP)" in the "local connection" attribute, and click "properties"

Figure 4 configure an IP address

3. Open a Web browser (such as IE browser)
Enter the http: // router IP address in the address bar, as shown in figureHttp: // 192.168.1.1If the connection is normal, the logon dialog box is displayed:

Figure 5 enter the user name and password in the logon box

4. Enter the vro Management Interface
5. Configure the Internet access mode and related parameters
The most important configuration is to select the Internet access mode and enter some configuration parameters provided to us by the ISP (such as China Telecom and China Unicom. The following uses PPPOE as an example to describe how to access the Internet.
Click "WAN" and select the Internet access method:

Figure 7 PPPOE

Figure 8 configure the user name and password

After configuration, do not forget to save the settings. You do not need to configure other parameters. Now you can use