How to set up a wireless network for a tp-link router

① Set the wireless signal for the computer to connect to the router.

If you want to use a computer to connect to a vro wirelessly, you must first ensure that your computer is equipped with a wireless network card and can work properly. The following describes how to search for and connect wireless signals to computers with different operating systems:

Windows XP:

L double-click the wireless network connection icon in the lower-right corner of the desktop, select the wireless signal of the router in the open signal list, and Click Connect.

L enter the previously set wireless password and click the connect button (note the consistency of the two inputs and the password case ).

Windows 7/Vista:

L click the wireless network connection icon in the lower-right corner of the desktop, select the wireless signal of the router in the open signal list, and click the connection button. Then, enter the wireless password you set and click OK.

② Set up a smart phone (taking the Android system as an example) to connect the wireless signal of the router.

L click the menu button of the smartphone, select system settings, and select WLAN from the settings menu. After enabling the WLAN function, select the wireless router signal name:

L enter the set wireless password to connect successfully. If the wireless connection is successful but cannot be connected to the Internet, you can try to manually specify the IP address of the mobile phone as shown in the following figure.

③ Set up IOS devices such as iPad and iPhone to connect to the wireless signal of the router.

L open the iPad main interface, select the "Settings" menu, and click wi-fi to enter the Wi-Fi network interface. Enable the Wi-Fi always-on and click the wireless signal of your own router in the wireless network list.

L enter the previously set wireless password and click the Join key. When "& radic;" is displayed in front of the corresponding SSID in the wireless signal list, you can use the iPad to access the Internet.

L If you need to manually specify network parameters such as the IP address of the iPad, you can click ">" blue "after the wireless SSID number in the wireless network list, click "static" to manually set the network parameters of the iPad.

Note: If you forget the password of the wireless router, you can reset the password as shown in the figure above. However, if you forget the password of the wireless router, you can perform the following operations:

There is a small reset in the place where the network cable is inserted behind the vro. Press it with your toothpick. After several seconds, the factory settings will be restored. This is the only way to do this, the user name and password are both default.

Two key points: first, you need to know your own broadband user account and password, which will be provided to you by network operators when installing broadband; the second is that you set the user name and password for your vro. This is also very important. Note that you can separate the upper and lower cases when entering the vro! Make sure there are no problems with the above two points. You can reset them normally.